Modelling and parameter fitting of the dosage of hydrogen peroxide in a photo-fenton process
Visualitza/Obre
ESCAPE-32 Final 2.pdf (862,0Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/375122
Tipus de documentComunicació de congrés
Data publicació2022
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This study addresses the modelling of the photo-Fenton processes, sensitivity analysis, and parameter fitting, focusing on the supply of hydrogen peroxide (H2O2) and aiming at the future exploitation in model-based optimization. A flexible H2O2 inlet flow (fed-batch) reported in the literature (Audino et al. 2019) was adopted and computational experiments were performed to examine the behaviour of the model and to investigate the opportunities for reducing its complexity. The fitting of the kinetic and stoichiometric parameters was first undertaken using simulated data and focusing on the experimentally available information: H2O2, Total Organic Carbon (TOC), and dissolved oxygen (O2). Hence, sensitivity analysis was conducted to assess the influence of the parameters of the model and the exclusion of those that do not contribute to explaining the process. Finally, the modified model was shown to fit to experimental data. These results provide valuable insight into the planning of the subsequent experimental phase of this research aimed at providing a reliable model of the flexible dosage of H2O2 in photo-Fenton processes.
CitacióNasr, K.; Pérez-Moya, M.; Graells, M. Modelling and parameter fitting of the dosage of hydrogen peroxide in a photo-fenton process. A: European Symposium on Computer Aided Process Engineering. "32nd European Symposium on Computer Aided Process Engineering". 2022, ISBN 9780323958790.
ISBN9780323958790
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ESCAPE-32 Final 2.pdf | 862,0Kb | Accés restringit |