Experimental analysis of multiaxial moment sensing techniques
Visualitza/Obre
master-thesis-main-and-appendix-marina-blasco.pdf (8,197Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/373573
Realitzat a/ambKatholieke Universiteit te Leuven
Tipus de documentProjecte Final de Màster Oficial
Data2022-05-03
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This thesis assesses the robustness of the design of an existing test rig used to calibrate clamp-on multi-axial moment sensors. The test bench was designed to recreate different loading conditions involving bending, torsion and a combination of both. A three-dimensional finite element model was developed to identify the test rig by performing static and modal analysis. Several assumptions were done during the modelling of the setup, and a simplified version of the test rig was used for the static analysis. Based on the results of the different analysis, some suggestions are done to improve the test rig design and its performance. Using a finite element model to test different design updates leads to a reduction of the time and costs in the design process. The main proposed changes in the design include a different way of applying torsional load to ensure that the input torque using a wrench is the same as the output, and some updates in the housing of the test rig to increase its stiffness. This improves the torsional and bending stiffness and gives a higher quasi-static behaviour frequency range
MatèriesMaterials -- Analysis -- Mathematical models, Rotational motion (Rigid dynamics) -- Testing -- Computer simulation, Materials -- Anàlisi -- Models matemàtics, Moviment rotatori (Dinàmica rígida) -- Proves -- Simulació per ordinador
TitulacióMÀSTER UNIVERSITARI EN ENGINYERIA INDUSTRIAL (Pla 2014)
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
master-thesis-main-and-appendix-marina-blasco.pdf | 8,197Mb | Accés restringit |