Ir al contenido (pulsa Retorno)

Universitat Politècnica de Catalunya

    • Català
    • Castellano
    • English
    • LoginRegisterLog in (no UPC users)
  • mailContact Us
  • world English 
    • Català
    • Castellano
    • English
  • userLogin   
      LoginRegisterLog in (no UPC users)

UPCommons. Global access to UPC knowledge

Banner header
59.689 UPC E-Prints
You are here:
View Item 
  •   DSpace Home
  • E-prints
  • Grups de recerca
  • HIPICS - High Performance Integrated Circuits and Systems
  • Ponències/Comunicacions de congressos
  • View Item
  •   DSpace Home
  • E-prints
  • Grups de recerca
  • HIPICS - High Performance Integrated Circuits and Systems
  • Ponències/Comunicacions de congressos
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

A low-power RF front-end for 2.5 GHz receivers

Thumbnail
View/Open
A_low-power_RF_front-end_for_2.5_GHz_receivers.pdf (223,1Kb)
Share:
 
 
10.1109/ISCAS.2008.4541583
 
  View Usage Statistics
Cita com:
hdl:2117/373131

Show full item record
Moreno Boronat, Lidia Ana
Gómez, D
González Jiménez, José Luis
Mateo Peña, DiegoMés informacióMés informacióMés informació
Aragonès Cervera, XavierMés informacióMés informacióMés informació
Berenguer, R
Solar, H
Document typeConference report
Defense date2008
PublisherInstitute of Electrical and Electronics Engineers (IEEE)
Rights accessOpen Access
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder
Abstract
This paper presents a low power and low cost front end for a direct conversion 2.5 GHz ISM band receiver composed of a 16 kV HBM ESD protected LNA, differential Gilbert-cell mixers, and high-pass filters for DC offset cancellation. The whole front-end is implemented in a 2P6M 0.18 µm RFCMOS process. It exhibits a voltage gain of 24dB and a SSB noise figure of 8.4dB which make it suitable for most of the 2.5 GHz wireless short-range communication transceivers. The achieved power consumption is only 1.06mW from a 1.2V power supply.
Description
© 2008 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitationMoreno, L. [et al.]. A low-power RF front-end for 2.5 GHz receivers. A: IEEE International Symposium on Circuits and Systems. "2008 IEEE International Symposium on Circuits and Systems (ISCAS): Seattle, WA, USA: May 18-21, 2008: proceedings". Institute of Electrical and Electronics Engineers (IEEE), 2008, p. 976-979. ISBN 978-1-4244-1683-7. DOI 10.1109/ISCAS.2008.4541583. 
URIhttp://hdl.handle.net/2117/373131
DOI10.1109/ISCAS.2008.4541583
ISBN978-1-4244-1683-7
Publisher versionhttps://ieeexplore.ieee.org/document/4541583
Collections
  • HIPICS - High Performance Integrated Circuits and Systems - Ponències/Comunicacions de congressos [144]
  • Departament d'Enginyeria Electrònica - Ponències/Comunicacions de congressos [1.643]
Share:
 
  View Usage Statistics

Show full item record

FilesDescriptionSizeFormatView
A_low-power_RF_front-end_for_2.5_GHz_receivers.pdf223,1KbPDFView/Open

Browse

This CollectionBy Issue DateAuthorsOther contributionsTitlesSubjectsThis repositoryCommunities & CollectionsBy Issue DateAuthorsOther contributionsTitlesSubjects

© UPC Obrir en finestra nova . Servei de Biblioteques, Publicacions i Arxius

info.biblioteques@upc.edu

  • About This Repository
  • Contact Us
  • Send Feedback
  • Privacy Settings
  • Inici de la pàgina