Experimental verification of a novel accelerometer intended for structural health monitoring of bridges
Visualitza/Obre
34234569.pdf (495,4Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/373086
Tipus de documentText en actes de congrés
Data publicació2022
EditorInternational Association for Bridge and Structural Engineers (IABSE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
ProjecteMODELOS ESTRUCTURALES PARA LA GESTION EFICIENTE DE INFRAESTRUCTURAS: SMART BIM MODELS (AEI-BIA2017-86811-C2-1-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
Abstract
Bridges can be considered one of the most critical infrastructures of any country. Subsequently, their health state assessment is of great importance. However, durable monitoring of bridges can be highly costly and time-consuming. In addition, the current Structural Health Monitoring applications are only applicable to individual structures with a high budget for their health assessment. For a long-term economic evaluation of bridges, low-cost sensors are currently being developed for SHM applications. However, their resolution and accuracy are not yet suitable for structural system identifications. For that, a novel accelerometer based on Arduino technology is introduced in this work. Experiments show that this accelerometer has a better resolution. Illustrated test results of this paper on a frequency range of 0.5 to 8 Hz validate the performance of the proposed accelerometer.
CitacióKomarizadehasl, S. [et al.]. Experimental verification of a novel accelerometer intended for structural health monitoring of bridges. A: International Association for Bridge and Structural Engineering Symposium. "IABSE Congress Nanjing 2022. Bridges and Structures: Connection, Integration and Harmonisation. Report". International Association for Bridge and Structural Engineers (IABSE), 2022, p. 1264-1272. ISBN 978-3-85748-184-0.
ISBN978-3-85748-184-0
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
34234569.pdf | 495,4Kb | Accés restringit |