Millora de la "mobilitat" o configuració de les botes respecte a la fixació de la taula perquè l’snowboarder no hagi de perdre temps posant i traient fixacions durant els trajectes a peu, pujant al telecadira o en caigudes
Visualitza/Obre
Memòria (11,30Mb) (Accés restringit)
Article (1,304Mb) (Accés restringit)
Annexos (6,972Mb) (Accés restringit)
Plànols (3,543Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/373040
Tutor / directorPeguero Martínez, Nil
Tipus de documentTreball Final de Grau
Data2022-07-05
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Aquest projecte tracta sobre la gestió i producció d’una fixació d’snowboard per a qualsevol bota d’snowboard per optimitzar les que actualment hi ha al mercat, dividint el treball en dues parts, una teòrica i una pràctica. A la part teòrica, proporcionada en aquest document, veurem tota la informació necessària per produir aquesta fixació tenint en compte tots els elements necessaris per al desenvolupament del producte. Per una altra banda, en la part pràctica, desenvoluparé el meu prototip final amb l’ajuda de diferents coneixements i eines apreses durant aquests anys a la universitat. Més detalladament, a la part teòrica he començat amb una breu introducció al projecte. En ella, podrem veure quina ha sigut la motivació, els objectius i sobretot la formulació dels problemes a solucionar. Aquests problemes, bàsicament, parlen sobre els impediments que tenen els usuaris d’aquest esport freqüentment, que no només causen incomoditats sinó que, fins i tot, poden arribar a ser causa d’accidents. Seguidament, per analitzar en termes generals les fixacions, he escrit una investigació, que parla sobre elles i altres continguts, com per exemple, la diferència entre certes marques, tipologies de fixacions que trobem actualment al mercat. Tenint tot això en compte, he realitzat diferents comparatives per tal d’aconseguir una millora en el producte final. Conjuntament amb la part pràctica, he desenvolupat un contingut que informa sobre la gestió i l’elaboració del prototip ideat a partir de l’estudi dels diferents àmbits i conceptes tinguts en compte. En aquest apartat, destaco el procediment que ha estat necessari seguir per la fabricació del meu prototip, començant per la gestió del projecte fins al llançament del producte final. This project deals with the management and production of a snowboard bindings for any snowboard boot to optimize those currently on the market, dividing the work into two parts, a theoretical and a practical. In the theoretical part, provided in this document, we will see all the information necessary to produce this fixation taking into account all the elements necessary for the development of the product. On the other hand, in the practical part, I will develop my final prototype with the help of different knowledge and tools learned during these years in college. In more detail, in the theoretical part I started with a brief introduction to the project. In it, we will be able to see what the motivation has been, the objectives and above all the formulation of the problems to be solved. These problems talk about the impediments that users of this sport have frequently, which not only cause discomfort but also can even lead to accidents. Next, to analyse in general terms the bindings, I wrote a research, which talks about them and other contents, such as the difference between certain brands, types of bindings that we currently find on the market. With all this in mind, I have made various comparisons in order to achieve an improvement in the final product. In conjunction with the practical part, I have developed content that informs about the management and development of the prototype devised from the study of the different areas and concepts taken into account. In this section, I highlight the procedure that has been necessary to follow for the manufacture of my prototype, starting with the management of the project until the launch of the final product.
TitulacióGRAU EN ENGINYERIA DE DISSENY INDUSTRIAL I DESENVOLUPAMENT DEL PRODUCTE (Pla 2009)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Memòria_CantónL ... una_fixació_dsnowboard.pdf | Memòria | 11,30Mb | Accés restringit | |
Article_CantónL ... una_fixació_dsnowboard.pdf | Article | 1,304Mb | Accés restringit | |
Annexos_CantónL ... una fixació dsnowboard.pdf | Annexos | 6,972Mb | Accés restringit | |
Plànols_CantónL ... una_fixació_dsnowboard.pdf | Plànols | 3,543Mb | Accés restringit |