Envíos recientes

• Influence of tank bottom surface on growth and welfare of Senegalese sole (Solea senegalensis) 

  Almansa, C.; Oca Baradad, Joan; Claramunt Blanes, Josep; Reig Puig, Lourdes (Elsevier, 2017-08-01)
  Artículo
  Acceso restringido por política de la editorial

  Tank bottom surface is an important question to take into account in flatfish aquaculture considering the intimate contact that the fish have with it. The most usual materials in aquaculture tank surfaces are inert materials ...
• Embroidery manufacturing techniques for textile dipole antenna applied to wireless body area network 

  Gil Galí, Ignacio; Fernández García, Raúl; Tornero García, José Antonio (2018-04-17)
  Artículo
  Acceso restringido por política de la editorial

  This paper addresses the design, simulation, manufacturing and experimental test of textile dipole antennas based on advanced embroidery techniques. The proposed dipoles are intended to operate at the 2.45 GHz industrial ...
• 

  Towards more sustainable material formulations: a comparative assessment of PA11-SGW flexural performance versus oil-based composites 

  Oliver-Ortega, Helena; Mendez, Jose Alberto; Reixach, Rafel; Espinach, Francesc Xavier; Ardanuy Raso, Mònica; Mutjé Pujol, Pere (2018-04-14)
  Artículo
  Acceso abierto

  The replacement of commodity polyolefin, reinforced with glass fiber (GF), by greener alternatives has been a topic of research in recent years. Cellulose fibers have shown, under certain conditions, enough tensile capacities ...
• Behavior of the interphase of dyed cotton residue flocks reinforced polypropylene composites 

  Serra, Albert; Tarrés, Quim; Claramunt Blanes, Josep; Mutjé Pujol, Pere; Ardanuy Raso, Mònica; Espinach, Francesc Xavier (Elsevier, 2017-11-14)
  Artículo
  Acceso restringido por política de la editorial

  Textile industry produces a high amount of residues that, nowadays, are poorly managed. The majority of such wastes are dumped and landfilled. Among all the textile value chain, cotton yarning factories produce wastes in ...
• 

  La fricción de los tejidos como estrategia para evaluar un proceso de acabado 

  Carrera Gallissà, Enric; Capdevila Juan, Francisco Javier (Asociación Española de Químicos y Coloristas Textiles, 2018-03-21)
  Artículo
  Acceso abierto

  En tecnología textil, el estudio de los fenómenos de fricción de fibras, hilos y tejidos tiene un gran interés puesto que permite conocer y predecir su comportamiento a lo largo del ciclo textil. El acabado silk-like es ...
• 

  Gas dissolution foaming as a novel approach for the production of lightweight biocomposites of PHB/natural fibre fabrics 

  Ventura Casellas, Heura; Sorrentino, Luigi; Laguna-Gutiérrez, Ester; Rodríguez Pérez, Miguel Ángel; Ardanuy Raso, Mònica (2018-02-28)
  Artículo
  Acceso abierto

  The aim of this study is to propose and explore a novel approach for the production of cellular lightweight natural ¿bre, nonwoven, fabric-reinforced biocomposites by means of gas dissolution foaming from composite precursors ...
• 

  Kinetics of low temperature polyester dyeing with high molecular weight disperse dyes by solvent microemulsion and agrosourced auxiliaries 

  Radei, Shahram; Carrión-Fité, Francisco Javier; Ardanuy Raso, Mònica; Canal Arias, José Ma (2018-02-16)
  Artículo
  Acceso abierto

  This work focused on the evaluation of the kinetics of dyeing polyester fabrics with high molecular weight disperse dyes, at low temperature by solvent microemulsion. This study also compared the effect of two non-toxic ...
• 

  Electrospun PLLA membranes for caffeine delivery: diffusional approach 

  Immich, Ana Paula; Tornero García, José Antonio; Cano Casas, Francesc; Lis Arias, Manuel José (Springer, 2017-12-29)
  Artículo
  Acceso abierto

  One of the great advantages of electrospun fibers is the large tridimensional area produced, capable of storing any type of material. The aim of our investigation is to study the electrospinning technique to produce polymer ...
• 

  Visto y no visto en Techtextil’17: novedades en tejidos, no tejidos y composites 

  Ardanuy Raso, Mònica (2017-11-01)
  Artículo
  Acceso abierto

  En la actualidad son muchas las posibilidades que ofrecen los textiles de uso técnico en diferentes aplicaciones como son construcciones arquitectónicas ligeras, refuerzo en materiales compuestos, deportes, transporte. ...
• Assessing friction in silk-like finished polyester fabrics 

  Carrera Gallissà, Enric; Capdevila Juan, Francisco Javier; Escusa Julian, Mercedes (2017-11-01)
  Artículo
  Acceso restringido por política de la editorial

  The influence of the silk-like finishing process on the frictional properties of polyester fabrics was examined by assessing fibre-to-metal friction through parameter R in a 100% polyester woven fabric processed under ...
• 

  Evaluation of thermal and thermomechanical behaviour of bio-based polyamide 11 based composites reinforced with lignocellulosic fibres 

  Oliver-Ortega, Helena; Alberto Méndez, José; Mutjé Pujol, Pere; Tarrés, Quim; Espinach, Francesc Xavier; Ardanuy Raso, Mònica (2017-10-18)
  Artículo
  Acceso abierto

  In this work, polyamide 11 (PA11) and stone ground wood fibres (SGW) were used, as an alternative to non-bio-based polymer matrices and reinforcements, to obtain short fibre reinforced composites. The impact of the ...
• Influence of silk-like finishing process variables on fabric properties 

  Carrera Gallissà, Enric; Capdevila Juan, Francisco Javier; Valldeperas Morell, Josep (2017-09-01)
  Artículo
  Acceso restringido por política de la editorial

  A 100% PES woven fabric was subjected to a silk-like finishing treatment using a two-factor (soda concentration and vaporisation time), three-level experimental design on a pilot plant in order to examine the influence of ...

Muestra más