TECTEX - Grup de recerca en Tecnologia Tèxtil

Enviaments recents

  • White paper on the future of plasma science and technology in plastics and textiles 

    Cvelbar, Uros; Walsh, James L.; Cernák, Mirko; Labay, Cédric Pierre; Canal Arias, José Ma; Canal Barnils, Cristina (2019-01-01)
    Article
    Accés obert
    This white paper considers the future of plasma science and technology related to the manufacturing and modifications of plastics and textiles, summarizing existing efforts and the current state‐of‐art for major topics ...

  • Tissue compatibility of SN-38-loaded anticancer nanofiber matrices 

    Manzanares Quintela, Alejandro; Restrepo-Perdomo, Camilo A.; Botteri, Gaia; Castillo Ecija, Helena; Pascual Pasto, Guillem; Cano Casas, Francesc; Garcia Alvarez, Laura; Monterrubio, Carles; Ruiz, Bonaventrua; Vazquez Carrera, Manuel; Suñol Capella, Mariona; Mora Graupera, Jaume; Tornero García, José Antonio; Sosnik, alejandro; Montero Carcaboso, Ángel (2018-06-11)
    Article
    Accés restringit per política de l'editorial
    Delivery of chemotherapy in the surgical bed has shown preclinical activity to control cancer progression upon subtotal resection of pediatric solid tumors, but whether this new treatment is safe for tumor-adjacent healthy ...

  • Introducción al diseño de tejidos por ordenador 

    Hernández Abad, Francisco; Capdevila Juan, Francisco Javier (Asociación de Técnicos de Informática, 1989-12)
    Article
    Accés obert
    Este trabajo introduce los principios fundamentales del tratamiento de los tejidos por el ordenador. No se pretende explicar programación, sinó tan sólo hacer comprender cómo se estructura la información para que el ordenador ...

  • Study of the flexural modulus of lignocellulosic fibers reinforced bio-based polyamide11 green composites 

    Oliver-Ortega, Helena; Llop Manero, Miquel Francesc; Espinach, Francesc Xavier; Tarrés, Quim; Ardanuy Raso, Mònica; Mutjé Pujol, Pere (Elsevier, 2018-07-03)
    Article
    Accés restringit per política de l'editorial
    The stiffness of a material has high impact when its industrial use is considered. Moreover, this property has interest in the case of short fiber reinforced materials due to its dependence on the orientation of the fibers ...

  • Use a modified ring method to predict drape properties in drapery fabrics 

    Carrera Gallissà, Enric; Capdevila Juan, Francisco Javier; Valldeperas Morell, Josep (2018-07-01)
    Article
    Accés obert
    Seven drape indicators and four of the parameters assessed in the UPC ring test were determined by using canonical correlations in 15 commercial drapery fabrics of variable composition, aerial weight and weave type. A ...

  • Impact strength and water uptake behaviors of fully bio-based PA11-SGW composites 

    Oliver-Ortega, Helena; Mendez, Jose Alberto; Espinach, Francesc Xavier; Tarrés, Quim; Ardanuy Raso, Mònica; Mutjé Pujol, Pere (Multidisciplinary Digital Publishing Institute (MDPI), 2018-06-30)
    Article
    Accés obert
    Composite materials have attracted the attention of some industrial fields due to their lightness and relatively good mechanical properties. One of these properties is impact strength, essential to ensure the processability ...

  • Influence of tank bottom surface on growth and welfare of Senegalese sole (Solea senegalensis) 

    Almansa, C.; Oca Baradad, Joan; Claramunt Blanes, Josep; Reig Puig, Lourdes (Elsevier, 2017-08-01)
    Article
    Accés restringit per política de l'editorial
    Tank bottom surface is an important question to take into account in flatfish aquaculture considering the intimate contact that the fish have with it. The most usual materials in aquaculture tank surfaces are inert materials ...

  • Embroidery manufacturing techniques for textile dipole antenna applied to wireless body area network 

    Gil Galí, Ignacio; Fernández García, Raúl; Tornero García, José Antonio (2018-04-17)
    Article
    Accés restringit per política de l'editorial
    This paper addresses the design, simulation, manufacturing and experimental test of textile dipole antennas based on advanced embroidery techniques. The proposed dipoles are intended to operate at the 2.45 GHz industrial ...

  • Towards more sustainable material formulations: a comparative assessment of PA11-SGW flexural performance versus oil-based composites 

    Oliver-Ortega, Helena; Mendez, Jose Alberto; Reixach, Rafel; Espinach, Francesc Xavier; Ardanuy Raso, Mònica; Mutjé Pujol, Pere (2018-04-14)
    Article
    Accés obert
    The replacement of commodity polyolefin, reinforced with glass fiber (GF), by greener alternatives has been a topic of research in recent years. Cellulose fibers have shown, under certain conditions, enough tensile capacities ...

  • Behavior of the interphase of dyed cotton residue flocks reinforced polypropylene composites 

    Serra, Albert; Tarrés, Quim; Claramunt Blanes, Josep; Mutjé Pujol, Pere; Ardanuy Raso, Mònica; Espinach, Francesc Xavier (Elsevier, 2017-11-14)
    Article
    Accés restringit per política de l'editorial
    Textile industry produces a high amount of residues that, nowadays, are poorly managed. The majority of such wastes are dumped and landfilled. Among all the textile value chain, cotton yarning factories produce wastes in ...

  • Using vegetable fiber nonwovens cement composites as sustainable materials for applications on ventilated fac¸ade systems 

    Claramunt Blanes, Josep; Ardanuy Raso, Mònica (2017-06-30)
    Capítol de llibre
    Accés restringit per política de l'editorial

  • La fricción de los tejidos como estrategia para evaluar un proceso de acabado 

    Carrera Gallissà, Enric; Capdevila Juan, Francisco Javier (Asociación Española de Químicos y Coloristas Textiles, 2018-03-21)
    Article
    Accés obert
    En tecnología textil, el estudio de los fenómenos de fricción de fibras, hilos y tejidos tiene un gran interés puesto que permite conocer y predecir su comportamiento a lo largo del ciclo textil. El acabado silk-like es ...

Mostra'n més