Influence of acrylonitrile content on the adhesive properties of water-based acrylic pressure-sensitive adhesives
Visualitza/Obre
Cita com:
hdl:2117/370822
Tipus de documentArticle
Data publicació2022-03-01
EditorMultidisciplinary Digital Publishing Institute (MDPI)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 4.0 Internacional
Abstract
A series of pressure-sensitive adhesives (PSA) were prepared by emulsion polymerization in order to obtain a PSA that meet with the current label market requirements. For it, the effect of the incorporation of acrylonitrile (ACN) as hard monomer was investigated in a n-butyl acrylate (n-BA) and acrylic acid (AA) system. Great differences were found in the adhesive performance according to the ACN weight ratio. Its increased resulted in a considerable rise in the average sol molecular weight and in the glass transition temperature. This was reflected in a decrease of adhesion forces (peel resistance and tack) and an increase of the cohesion forces (shear resistance). Moreover, the incorporation of the minimum amount of ACN studied showed a great change in the elastic modulus determined by dynamic shear resistance with respect to the based formulation that did not contain ACN. Finally, the ice bucket test was carried out to check the adhesive performance in cold and wet environments.
CitacióMarquez, I. [et al.]. Influence of acrylonitrile content on the adhesive properties of water-based acrylic pressure-sensitive adhesives. "Polymers", 1 Març 2022, vol. 14, núm. 909, p. 1-13.
ISSN2073-4360
Versió de l'editorhttps://www.mdpi.com/2073-4360/14/5/909
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
polymers-14-00909.pdf | 3,549Mb | Visualitza/Obre |