Electrochemical multi-sensors obtained by applying an electric discharge treatment to 3D-printed poly(lactic acid)
Visualitza/Obre
Fontana_Escartin_etal_rev2.pdf (1,846Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.apsusc.2022.153623
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/369123
Tipus de documentArticle
Data publicació2022-09-30
Condicions d'accésAccés restringit per política de l'editorial
(embargat fins 2024-10-01)
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 4.0 Internacional
Abstract
Electrochemical sensors for real-time detection of several bioanalytes have been prepared by additive manufacturing, shaping non-conductive poly(lactic acid) (PLA) filaments, and applying a physical treatment to create excited species. The latter process, which consists of the application of power discharge of 100 W during 2 min in a chamber at a low pressure of O2, converts electrochemically inert PLA into an electrochemically responsive material. The electric discharge caused the oxidation of the PLA surface as evidenced by the increment in the quantity of oxygenated species detected by FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). Indeed, changes in the surface chemical composition became more pronounced with increasing O2 pressure. After demonstrating the performance of the chemically modified material as individual dopamine and glucose sensors, multiplexed detection has been achieved by measuring simultaneously the two voltammetric signals. This has been performed by collecting the signals in two different regions, a naked chemically modified PLA for dopamine detection and a chemically modified PLA region functionalized with Glucose Oxidase. These outcomes led to define a new paradigm for manufacturing electrodes for electrochemical sensors based on 3D printing without using conducting materials at any stage of the process.
CitacióFontana, A. [et al.]. Electrochemical multi-sensors obtained by applying an electric discharge treatment to 3D-printed poly(lactic acid). "Applied surface science", 30 Setembre 2022, vol. 597, núm. 153623, p. 1-12.
ISSN0169-4332
Versió de l'editorhttps://www.sciencedirect.com/science/article/abs/pii/S0169433222011746
Col·leccions
- Departament de Física - Articles de revista [2.208]
- IMEM-BRT- Innovation in Materials and Molecular Engineering - Biomaterials for Regenerative Therapies - Articles de revista [398]
- Doctorat en Polímers i Biopolímers - Articles de revista [152]
- Departament d'Enginyeria Química - Articles de revista [2.226]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Fontana_Escartin_etal_rev2.pdf | 1,846Mb | Accés restringit |