A novel data acquisition system for obtaining thermal parameters of building envelopes
Visualitza/Obre
Cita com:
hdl:2117/368310
Tipus de documentArticle
Data publicació2022-05
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement 4.0 Internacional
ProjecteMODELOS ESTRUCTURALES PARA LA GESTION EFICIENTE DE INFRAESTRUCTURAS: SMART BIM MODELS (AEI-BIA2017-86811-C2-1-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
Abstract
Owing to the high energy consumption in the building sector, appraising the thermal performance of building envelopes is an increasing concern. Recently, a few in situ methodologies to diagnose the thermal parameters of buildings have been considered. However, because of their limitations such as low accuracy, limited number of measurements, and the high cost of monitoring devices, researchers are seeking a new alternative. In this study, a novel hyper-efficient Arduino transmittance-meter was introduced to overcome these limitations and determine the thermal parameters of building envelopes. Unlike conventional methodologies, the proposed transmittance-meter is based on synchronized measurements of different parameters necessary to estimate the transmittance parameter. To verify the applicability of the transmittance-meter, an experimental study was conducted wherein a temperature-controlled box model was thermally monitored, and the outputs of the transmittance-meter employed were compared with those captured by a commercial device. The results revealed a high level of reduction in cost and a low range of difference compared with the latter, thereby validating the applicability of the proposed thermal monitoring system.
CitacióMobaraki, B. [et al.]. A novel data acquisition system for obtaining thermal parameters of building envelopes. "Buildings", Maig 2022, vol. 12, núm. 5, p. 670:1-670:20.
ISSN2075-5309
Versió de l'editorhttps://www.mdpi.com/2075-5309/12/5/670/htm
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
33820093.pdf | 9,038Mb | Visualitza/Obre |