Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel
Visualitza/Obre
1-s2.0-S1044580321006896-main.pdf (8,228Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.matchar.2021.111567
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/368121
Tipus de documentArticle
Data publicació2021-10-30
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Understanding the kinetics of microstructural degradation during the event of a fire is of major relevance to future optimization of fire-resistant steels (FRS). In this work, we use in situ synchrotron X-ray diffraction to assess the rapid thermally-assisted degradation of different starting microstructures, such as (i) ferrite + pearlite; (ii) bainite + retained austenite, and (iii) martensite + retained austenite, during the simulation of a fire cycle in a Fe-0.13C-0.11Cr-0.38Mo-0.04V FRS. Our results show that retained austenite is the most unstable phase, especially when generated by faster cooling rates, decomposing at temperatures as low as 180 °C during fire simulations. Bainite and martensite are both unstable and undergo recovery and carbon desaturation via secondary precipitation of cementite. However, bainite is comparatively more stable than martensite since its decomposition starts at 400 °C, while for martensite it occurs at 320 °C. We also present a methodology to deconvolute the effect of temperature on the increased background and signal intensities of the X-ray spectra, allowing the direct observation of the kinetics of secondary cementite precipitation.
CitacióEscobar, J. [et al.]. Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel. "Materials characterization", 30 Octubre 2021, vol. 182, núm. Article 111567.
ISSN1044-5803
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S1044580321006896-main.pdf | 8,228Mb | Accés restringit |