Show simple item record

dc.contributor.authorGoncharov, Ivan
dc.contributor.authorGarcía Mintegui, Claudia
dc.contributor.authorPegueroles Neyra, Marta
dc.contributor.authorVedani, M.
dc.date.accessioned2022-05-23T12:27:43Z
dc.date.available2022-06-16T00:32:19Z
dc.date.issued2022-06-16
dc.identifier.citationGoncharov, I. [et al.]. Binder jetting additive manufacturing of biodegradable Zn. A: 11th EEIGM International Conference on Advanced Materials Research. "11th EEIGM International Conference on Advanced Materials Research: Barcelona, Spain, EEBE-UPC: June 16-17, 2022: Abstracts". Universitat Politècnica de Catalunya, 2022,
dc.identifier.urihttp://hdl.handle.net/2117/367621
dc.description.abstractBiodegradable materials avoid second surgeries and long-term associated risks of conventional inert implants. Zn arose as a potential candidate for bioresorbable implants due to its proper degradation behaviour and biocompatibility [1]. However, its low melting point induces uncontrolled porosity in LPBF, promoting the future cracking of the implant. Therefore, new fabrication techniques need to be explored. In this work, binder jetting 3d printing (BJ3P) was studied for Zn powders. The samples were printed and sintered under different conditions. It is concluded that, the increase the temperature almost up to melting point leads to higher densification, at the same time, the rise of temperature provokes the formation and growth of oxidized layer on the surface of the powders.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.otherBiodegradable materials
dc.subject.otherImplants
dc.subject.otherAdditive Manufacturing (AM)
dc.titleBinder jetting additive manufacturing of biodegradable Zn
dc.typeConference lecture
dc.rights.accessOpen Access
local.citation.contributor11th EEIGM International Conference on Advanced Materials Research
local.citation.publicationName11th EEIGM International Conference on Advanced Materials Research: Barcelona, Spain, EEBE-UPC: June 16-17, 2022: Abstracts


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record