Mostra el registre d'ítem simple

dc.contributor.authorTierra Arévalo, Marcelo
dc.contributor.authorAyala Chauvin, Manuel Ignacio
dc.contributor.authorNacevilla, Carmen
dc.contributor.authorFuente Morató, Albert de la
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Sostenibilitat
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.date.accessioned2022-04-26T11:20:57Z
dc.date.issued2021-09-18
dc.identifier.citationTierra, M. [et al.]. Prevention of Failures in the Footwear Production Process by Applying Machine Learning. A: "Smart Innovation, Systems and Technologies". Berlín: Springer, 2021, p. 12-23.
dc.identifier.urihttp://hdl.handle.net/2117/366334
dc.description.abstractAt present, the handcrafted footwear sector is affected by the high competitiveness due to the increasing automation of companies. In this sense, in order to improve its competitiveness, a system was proposed to predict the failures of a production system and to carry out preventive maintenance actions. Samples were taken from 25 productions and 7 activities were established: cutting, stitching, pre fabrication, final preparation, gluing, assembly and finishing. The company produces batches of 90 pairs per day, with a standard time of 274.53 min and a promised productivity of 1.8. A support vector machine model was developed to predict the possible failures of the process taking as a reference the standard time of each stage. Finally, the results allow predicting the faults to optimise the production process by applying Support Vector Machine (SVM).
dc.format.extent12 p.
dc.language.isoeng
dc.publisherSpringer
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Fabricació
dc.subject.lcshManufacturing processes
dc.subject.otherProduction
dc.subject.otherShoes
dc.subject.otherSupport vector machine
dc.titlePrevention of Failures in the Footwear Production Process by Applying Machine Learning
dc.typePart of book or chapter of book
dc.subject.lemacFabricació
dc.contributor.groupUniversitat Politècnica de Catalunya. CITCEA - Centre d'Innovació Tecnològica en Convertidors Estàtics i Accionaments
dc.identifier.doi10.1007/978-981-16-6128-0_2
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://link.springer.com/chapter/10.1007%2F978-981-16-6128-0_2
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac32113122
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorTierra, M.; Ayala, M.; Nacevilla, C.; De La Fuente, A.
local.citation.pubplaceBerlín
local.citation.publicationNameSmart Innovation, Systems and Technologies
local.citation.startingPage12
local.citation.endingPage23


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple