Elevated flat slab of fibre reinforced concrete non-linear simulation up to failure
Visualitza/Obre
00360057.pdf (2,012Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1007/978-3-030-83719-8_57
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/365906
Tipus de documentComunicació de congrés
Data publicació2021
EditorSpringer
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The growing use of fibre reinforced concrete (FRC) on structural concrete has made that several codes and guidelines have included models for design in which the traditional reinforcement has been substituted partially or totally. Among the industrial applications, fibres as reinforcement of elevated flat slabs is gaining interest due the post-break bearing capacity of the material. This technology has already been used for real scale structures. This research contribution is focused on a parametrical analysis of FRC elevated flat slab by means of non-linear finite element simulation. The model is calibrated and compared with the real scale experimental test and with experimental slabs tested up to failure that can be found in the literature. The main goal of this paper is to carry out a parametrical analysis of the slab combining different types of reinforcement: FRC and hybrid reinforcement (fibres¿+¿conventional reinforcement) under design loads eventually choosing an amount of fibres for an actual test The results demonstrated that the combination of fibres and rebar improves the structure against failure, reduces deformation and presents a crack pattern better for cracking control.
CitacióNogales, A.; De la Fuente, A. Elevated flat slab of fibre reinforced concrete non-linear simulation up to failure. A: RILEM-fib International Symposium on Fibre Reinforced Concrete. "Fibre Reinforced Concrete: Improvements and Innovations II: X RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB) 2021". Berlín: Springer, 2021, p. 666-677. ISBN 978-3-030-83719-8. DOI 10.1007/978-3-030-83719-8_57.
ISBN978-3-030-83719-8
Versió de l'editorhttps://link.springer.com/chapter/10.1007/978-3-030-83719-8_57
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
00360057.pdf | 2,012Mb | Accés restringit |