Preliminary proposal for an alternative wall lining panel based on molded recycled cellulose and designed for home wiring refurbishment of building interior partitions
Visualitza/Obre
Cita com:
hdl:2117/364541
Tipus de documentArticle
Data publicació2021-05-01
EditorMultidisciplinary Digital Publishing Institute (MDPI)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement 3.0 Espanya
Abstract
Old dwellings usually have shortfalls in insulation, acoustic and thermal, and in security of electrical services in the interior partition walls. A common building solution is to add a wall lining with a laminate base gypsum board that improves both acoustic and thermal insulation and facilitates a new invisible cable layout without demolition. Conventional solutions have had limited success because of time consumption, environmental impact and cost. This research aimed to create an integrated building system to carry out these interior building refurbishment works quickly, cleanly and with low inconvenience and environmental impact. The research specifically focused on incorporating new molded materials that have a low environmental impact and improving the handling and future modification of the wall lining system. In response to the above goals, the product development methodology was applied to the design of an internal panel to be inserted between the existing partition wall and the closure wallboard, which is usually laminated base gypsum board (LGB). The proposed internal panel is molded with recycled cellulose pulp (Biprocel) and has adequate relief designed to improve cable layout tasks and better join the laminate base gypsum board to the existing wall face. The development resulted from collaboration between the public administration, university researchers and undergraduate students in the co-design process. This research contributes to improving the applications of recycled cellulose fibers in molded panels for the building industry, particularly in refurbishment activities.
CitacióSerra, R.; Zamora, J.L. Preliminary proposal for an alternative wall lining panel based on molded recycled cellulose and designed for home wiring refurbishment of building interior partitions. "Sustainability (Switzerland)", 1 Maig 2021, vol. 13, p. 1-18.
ISSN2071-1050
Versió de l'editorhttps://www.mdpi.com/2071-1050/13/9/4643
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
sustainability-13-04643-v2.pdf | 12,84Mb | Visualitza/Obre |