Rotatory 3D structured mesh study using openFOAM to simulate the flow in francis turbine
Visualitza/Obre
10.1016/j.matpr.2021.07.492
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/361730
Tipus de documentArticle
Data publicació2021
EditorElsevier
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The development of a methodology to simulate numerically the steady state flow field in Francis turbines was carried out using the open source CFD software OpenFOAM along with a MRF and AMI approach. A structured mesh obtained from previous studies was used with some modifications to solve the presence of imbalance points in the simulation. Numerical simulations using the SIMPLE algorithm were performed together with two different turbulence models. It was confirmed that the results obtained reproduced the phenomenon with a great approximation and predicted the output load with only a deviation of around 5.02% against experimental data
CitacióHidalgo, V. [et al.]. Rotatory 3D structured mesh study using openFOAM to simulate the flow in francis turbine. "Materials Today: Proceedings", 2021, vol. 49, núm. 1, p. 142-148.
ISSN2214-7853
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Hidalgo.pdf | 1,687Mb | Visualitza/Obre |