Show simple item record

dc.contributor.authorRipoll Vercellone, Edgar
dc.contributor.authorGasulla Forner, Manuel
dc.contributor.authorReverter Cubarsí, Ferran
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Enginyeria Electrònica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2022-01-18T10:43:31Z
dc.date.available2022-06-08T00:28:47Z
dc.date.issued2021-06-08
dc.identifier.citationRipoll, E.; Gasulla, M.; Reverter, F. Electronic reading of a mechanical gas meter based on dual magnetic sensing. "Measurement Science and Technology", 8 Juny 2021, vol. 32, núm. 9, p. 097001:1-097001:5.
dc.identifier.issn1361-6501
dc.identifier.urihttp://hdl.handle.net/2117/359889
dc.description.abstractThis article proposes a measurement system controlled by a microcontroller unit (MCU) for the electronic reading of a mechanical gas meter. The measurement relies on dual magnetic sensing: (a) low-cost low-power primary sensing based on reed switches connected to the digital inputs of the MCU and (b) secondary sensing based on Hall-effect sensors connected to the analogue inputs of the MCU. In addition, both sensing strategies have an active and a passive element to achieve an output that is insensitive to external interfering magnets. A prototype has been implemented and characterized under different test conditions to confirm its reliability.
dc.description.sponsorshipThis work was supported by the Secretariat of University and Research of the Ministry of Business and Knowledge of the Government of Catalonia, and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Microelectrònica
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Instrumentació i mesura::Sensors i actuadors
dc.subject.lcshMicroelectronics
dc.subject.lcshMagnetic semiconductors
dc.subject.otherEmbedded system
dc.subject.otherGas meter
dc.subject.otherHall-effect sensor
dc.subject.otherMagnetic sensor
dc.subject.otherMicrocontroller
dc.subject.otherReed switch
dc.titleElectronic reading of a mechanical gas meter based on dual magnetic sensing
dc.typeArticle
dc.subject.lemacMicroelectrònica
dc.subject.lemacSemiconductors magnètics
dc.contributor.groupUniversitat Politècnica de Catalunya. e-CAT - Circuits i Transductors Electrònics
dc.identifier.doi10.1088/1361-6501/ac00e8
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://iopscience.iop.org/article/10.1088/1361-6501/ac00e8
dc.rights.accessOpen Access
local.identifier.drac32023872
dc.description.versionPostprint (author's final draft)
dc.relation.projectidinfo:eu-repo/grantAgreement/MINECO/1PE/TEC2016-76991-P
local.citation.authorRipoll, Edgar; Gasulla, M.; Reverter, F.
local.citation.publicationNameMeasurement Science and Technology
local.citation.volume32
local.citation.number9
local.citation.startingPage097001:1
local.citation.endingPage097001:5


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder