An alternative method to develop embroidery textile strain sensors
Visualitza/Obre
https://doi.org/10.3390/textiles1030026
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/359074
Tipus de documentArticle
Data publicació2021-11-13
EditorMDPI AG
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement 3.0 Espanya
Abstract
In this paper, a method to develop embroidered textile strain resistive sensors is presented. The method is based on two overlapped zigzag conductive yarn patterns embroidered in an elastic textile. To demonstrate the functionality of the proposed configuration, a textile sensor embroidered with a conductor yarn composed of 99% pure silver-plated nylon yarn 140/17 dtex has been experimentally characterised for an elongation range from 0% to 65%. In order to show the sensor applicability, a second test with the sensor embroidered in a knee-pad has been done to evaluate the flexion knee angle from 180° to 300°. The experimental results show the usefulness of the proposed method to develop fabric strain sensors that can help to manufacture commercial applications on the healthcare sector.
CitacióMartinez, M.; Gil, I.; Fernandez-Garcia, R. An alternative method to develop embroidery textile strain sensors. "Textiles", 13 Novembre 2021, vol. 1, núm. 3, p. 504-512.
ISSN2673-7248
Versió de l'editorhttps://www.mdpi.com/2673-7248/1/3/26/pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
textiles-01-00026.pdf | Articulo | 661,2Kb | Visualitza/Obre |