Non-destructive techniques for characterising earthen structures
Visualitza/Obre
Non-destructive techniques for characterising.pdf (840,1Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/358402
Tipus de documentComunicació de congrés
Data publicació2021
EditorInternational Centre for Numerical Methods in Engineering (CIMNE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Earthen architecture is one of the most relevant building technologies among heritage structures. However, mechanical properties are commonly obtained from destructive tests. To contribute at changing this trend, two non-destructive mechanical techniques (ultrasound and modal analysis) are studied to determine their ability at characterizing earthen materials and their possible correlation. To achieve these purposes, twenty cubic-shaped earthen specimens were produced for testing the capability of ultrasound transmission method to control moisture content and its evolution during drying process at different environments. Additionally, a real-scale rammed earth wall was built to assess the feasibility of using ultrasound technique to determine elastic dynamic Young modulus. This analysis was validated by indirect comparison with experimental modal analysis test results. The most important findings are that the relationship between moisture content and ultrasound transmission speed is linear. This information is useful to control the drying process of earthen materials and to control the moisture content distribution on larger in-service structures. Finally, numerical simulation using ultrasound transmission data as input information allow to predict the vibrational response of the tested wall with an error around 3%.
CitacióBernat, E. [et al.]. Non-destructive techniques for characterising earthen structures. A: International Conference on Structural Analysis of Historical Constructions. "SAHC 2021: 12th International Conference on Structural Analysis of Historical Constructions". Barcelona: International Centre for Numerical Methods in Engineering (CIMNE), 2021, p. 746-756. ISBN 978-84-123222-0-0.
ISBN978-84-123222-0-0
Versió de l'editorhttps://congress.cimne.com/SAHC2020/frontal/doc/Ebook_SAHC2020.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Non-destructive techniques for characterising.pdf | 840,1Kb | Accés restringit |