Experimental and numerical analysis of reed valve movement in an impact fatigue test system and reciprocating compressors
Experimental and Numerical Analysis Of Reed Valve Movement In An.pdf (1,397Mb) (Restricted access) Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Document typeConference report
Rights accessRestricted access - publisher's policy
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder
During operation of a reciprocating compressor, its flapper valve opens to allow the passage of gases and closes by striking against the valve impact plate. This reed valve movement and impact is repeated billions of times. This cyclic movement has a significant influence on the impact fatigue life of the reed valve and, hence, the lifetime of a compressor. Inside a reciprocating compressor, a number of parameters including: the valve design, valve material, compressor operating frequency and suction/exhaust pressure, influence the reed valve movement. The valve movement can be defined in terms of valve frequency, valve lift, valve velocity and impact velocity. These response parameters heavily influence the compressor efficiency and impact fatigue life of reed valves. In this paper, we first studied the valve movement parameters for a reed valve design using an experimental test setup. In experimental testing, the valves were excited into movement using air pressure pulses at a frequency of 100 Hz (air pulse width of 5 milliseconds). The valve movement was recorded by a laser sensor at 10 000 frames per second. The operating conditions such as the operating frequency, air pulse width, applied pressure and airflow rate were measured. The valves were not tested to failure but only to collect the dynamic data of valve movement such as the valve movement curve (valve displacement vs time), average valve lift and reed velocity data. The same valve design was simulated by means of different commercial software to determine its natural modes of vibration from modal analysis. The experimental results were employed to validate a complex in-house 3D CFD finite-volume model aimed at studying in detail the valve and gas dynamics, whose interaction is solved by means of a Fluid-Structure Interaction (FSI) algorithm. The complete valve movement curve obtained from simulations – reed valve displacement vs time – correlated with that obtained from the experimental tests with small error. Similarly, the difference in experimental and numerically obtained average valve lift and impact velocity values were quite small for practical purposes. Finally, fluid-dynamic results for pressure and impact forces were employed to feed a finite-element based code aimed at studying the structural behavior of the reed vale. Bending fatigue and impact fatigue stresses induced in the reed valve during its movement cycle were calculated. The magnitude of stresses and their positioning was determined, which correlated with the commonly observed areas of fracture initiation in these valves. The numerical models, as well as the information obtained from this study will help the compressor manufacturers to design their compressors to enhance efficiency and reed valve’s reliability. This type of information is not readily available from a working compressor.
CitationTofique, M.W. [et al.]. Experimental and numerical analysis of reed valve movement in an impact fatigue test system and reciprocating compressors. A: International Compressor Engineering Conference at Purdue. "International Compressor Engineering Conference at Purdue: proceedings from 2021". Purdue Mall, West Lafayette, Indiana: Purdue University, 2021, p. 1-11.
|Experimental an ... d Valve Movement In An.pdf||1,397Mb||Restricted access|