Novel plastic hinge modification factors for damaged RC shear walls with bending performance
Visualitza/Obre
32224265.pdf (1,507Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/356711
Tipus de documentArticle
Data publicació2021-10
EditorTechno-Press
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper introduces several new damage states for shear walls with flexural behavior damaged in an earthquake. These damage states are deducted by carefully interpretation of reported available test results of shear walls in the literature. Moreover, two methods for obtaining the plastic hinge modification factors of strength, stiffness and ductility capacity of the damaged shear walls with the flexural behavior are presented. A method based on secant stiffness at maximum displacement of each cycle of observed damage and the second method uses the reloading stiffness of the hysteresis curves consistent with damage levels. The later method introduced in this research is more reasonable for obtaining modification factors among the introduced methods. Using these factors, a reliable residual capacity for damaged structures can be assessed and the proper seismic retrofitting method can be followed. In this research, the effects of damages caused by various experimental tests have been studied on 43 reinforced concrete shear walls with flexural behavior. By introducing and describing the bending performance
CitacióKomarizadehasl, S.; Khanmohammadi, M. Novel plastic hinge modification factors for damaged RC shear walls with bending performance. "Advances in concrete construction", Octubre 2021, vol. 12, núm. 4, p. 355-365.
ISSN2287-5301
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
32224265.pdf | 1,507Mb | Accés restringit |