Power-based equivalent-modeling circuit for DC linear time-invariant resistive one-port networks
10.1109/ACCESS.2021.3057435
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/355593
Tipus de documentArticle
Data publicació2021-02-05
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper introduces a new equivalent circuit for linear DC networks containing independent voltage and/or current sources and resistors, which represents all internal losses. Since the equivalent-modeling proposal does allow the determination of the efficiency of the original circuit or of all power dissipated in the internal resistors, it can be used for both the power and efficiency analysis of the real linear networks. The proposed equivalent circuit can be considered an extension to and differs from those proposed by Thévenin, and other subsequent proposals with regard to its conservativeness in relation to the actual circuit. Therefore, the paper also demonstrates that there is a direct relation between the model presented here and that proposed by Thévenin.
CitacióMartinez, H.; Garcia, E. Power-based equivalent-modeling circuit for DC linear time-invariant resistive one-port networks. "IEEE access", 5 Febrer 2021, vol. 9, núm. 9348932, p. 23326-23334.
ISSN2169-3536
Versió de l'editorhttps://ieeexplore.ieee.org/document/9348932
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Power-Based_Equ ... tive_One-Port_Networks.pdf | 5,862Mb | Visualitza/Obre |