Recent Submissions

• 

  Vigas de hormigón armado reforzadas a flexión con materiales tipo Fabric-Reinforced Cementitious Matrix. Estudio experimental y analítico 

  Escrig Pérez, Christian; Gil Espert, Lluís (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2017-03)
  Book
  Open Access

  Descripción de una serie de ensayos a flexión sobre vigas de hormigón armado reforzadas con textiles y morteros. Resultados de los ensayos y formulaciones analíticas para el cálculo del refuerzo. Estudio comparativo de ...
• 

  Refuerzo a cortante de vigas de hormigón armado con tejidos y matrices base cemento. Análisis y comparativa 

  Escrig Pérez, Christian; Gil Espert, Lluís (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2016-06-01)
  Book
  Open Access

  El principal objetivo de la presente investigación es realizar un estudio comparativo sobre la capacidad de diversos tipos de TRM actuando como refuerzo a cortante en vigas de hormigón armado de características actuales1. ...
• TRM : preventing the mixed bending/buckling failure of masonry walls : experimental, analytical and numerical research 

  Bernat Masó, Ernest (OmniscriptumGmbH & Co.KG, 2015)
  Book
  Restricted access - publisher's policy

  The response of load-bearing brick masonry walls is characterised by the second-order bending effects due to the eccentricity of the load, the non-linear compressive response of the masonry and its almost negligible tensile ...
• Analysis of unreinforced masonry walls under eccentric axial load 

  Bernat Masó, Ernest (Scholar's Press, 2014)
  Book
  Restricted access - publisher's policy

  Many buildings are supported by load-bearing masonry walls and maintaining them is a need. Hence, a comprehensive study of these structures is necessary as a starting point. These walls are mostly subjected to vertical ...
• 

  Numerical modeling of crack formation in power compaction processes 

  Hernández Ortega, Joaquín Alberto; Oliver Olivella, Xavier; Cante Terán, Juan Carlos (Universitat Politècnica de Catalunya. Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2009)
  Book
  Open Access

  Powder metallurgy (P/M) is an important technique of manufacturing metal parts from metal in powdered form. Traditionally, P/M processes and products have been designed and developed on the basis of practical rules and ...