Interaction of geometric and material nonlinearities in stainless steel frames
Visualitza/Obre
31796216.pdf (935,4Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/351298
Tipus de documentComunicació de congrés
Data publicació2021
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Adequate mechanical properties make stainless steel an excellent construction material for structures. The current stainless steel European structural code EN1993-1-4 (2015) is largely based on provisions given for carbon steel EN1993-1-1 (2005) and does not establish specific design rules for the global analysis of stainless steel structures. Thus, the same classification criterion applies in both codes for sway and non-sway structures, as well as providing the same predicting expressions for the amplification of bending moments in basic structures, despite the considerable differences between the mechanical behaviour of these two materials. However, recent numerical research on stainless steel frames with H cross-sections by Walport et al. (2019) showed that the degradation of stiffness due to material nonlinearities considerably affects the response of stainless steel frames, causing greater deformations and increasing second order effects. In order to contribute to the optimal design of stainless steel structures, this paper investigates the influence of the nonlinear material response of stainless steel alloys on frame-type structures with Rectangular Hollow Sections based on the experimental results conducted by Arrayago et al. (2019), and the interaction of material and geometric nonlinearities.
CitacióGonzález-de-León, I.; Arrayago, I.; Real, E. Interaction of geometric and material nonlinearities in stainless steel frames. A: European Conference on Steel and Composite Structures. "EuroSteel 2021 - European Conference on Steel and Composite Structures: Sheffield, UK. September 1-3, 2021:proceedings book". 2021, p. 2149-2157. DOI 10.1002/cepa.1533.
Versió de l'editorhttps://onlinelibrary.wiley.com/doi/abs/10.1002/cepa.1533
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
31796216.pdf | 935,4Kb | Accés restringit |