Buckling curves for cold-formed stainless-steel columns and beams
10.1061/(ASCE)ST.1943-541X.0003084
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/350197
Tipus de documentArticle
Data publicació2021-10
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper summarises the background information and methodology used to derive a set of buckling curves proposed for cold-formed stainless steel columns and beams, incorporated in the recently revised SEI/ASCE 8-21 Specification. The study is based on experimental and numerical data collected from the literature on cold-formed stainless steel columns and beams featuring ASTM grades 304, 2101, 430, 404 and 443. Since most of the investigated specimens exhibited slender cross-sections, both the Effective Width Method (EWM) and the Direct Strength Method (DSM) are considered to account for the effect of interaction between global and local buckling on member strength. Buckling curves for flexural buckling and lateral-torsional buckling codified in current international standards are assessed based on the SEI/ASCE 8 reliability requirements, and new curves are derived accordingly. The proposed new buckling curves include expressions to account for the post-yielding capacity of stainless steel columns and the inelastic buckling resistance of cold-formed stainless steel beams. In addition, a new local buckling strength curve for members in flexure is proposed in the format of the DSM and shown to provide equivalent design resistances to the EWM.
Descripció
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0003084.
CitacióArrayago, I.; Rasmussen, K.J.R. Buckling curves for cold-formed stainless-steel columns and beams. "Journal of structural engineering (New York, N.Y.)", Octubre 2021, vol. 147, núm. 10, p. 04021149:1-04021149:14.
ISSN0733-9445
Versió de l'editorhttps://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0003084
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Buckling curves ... teel columns and beams.pdf | 626,8Kb | Visualitza/Obre |