Modeling of a DC-DC bidirectional converter used in mild hybrid electric vehicles from measurements
Visualitza/Obre
10.1016/j.measurement.2021.109838
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/350170
Tipus de documentArticle
Data publicació2021-10-13
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper presents a non-intrusive approach for modeling a bidirectional DC-DC converter used in mild hybrid electric vehicles. A black-box identification methodology is proposed to find a model based on the data acquired from the input/output terminals. Measured data include the steady state and transient response, and different operating conditions of the DC-DC converter, including the buck and boost modes. A deep learning architecture based on a long-short-term memory neural network (LSTM-NN) is applied. The trained network is tested under a set of operating points different from those used during the training stage. The proposed method is compared with three black-box modeling techniques commonly used in power converters, proving its superior performance. Results presented in this paper indicate that the proposed model is able to replicate the behavior of the bidirectional converter without a priori knowledge of the converter circuitry. This approach can also be applied to other power devices.
CitacióRojas, G.; Riba, J.; Moreno-Eguilaz, J.M. Modeling of a DC-DC bidirectional converter used in mild hybrid electric vehicles from measurements. "Measurement", 13 Octubre 2021, vol. 183, p. 109838:1-109838:8.
ISSN0263-2241
Versió de l'editorhttps://www.sciencedirect.com/science/article/abs/pii/S0263224121007867
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
postprint_Measurement_Rojas_et_al_2021.pdf | Artículo principal | 2,335Mb | Visualitza/Obre |