Friction stir welding of AA2024-T3: development of numerical simulation considering thermal history and heat generation
Visualitza/Obre
Cita com:
hdl:2117/347800
Tipus de documentArticle
Data publicació2021-05-15
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper proposes a finite element model implemented in ANSYS using Lagrangian formulation to assess heat generation and friction dynamics of a friction stir welding process on AA2024-T3 aluminum plates. For that aim, the model is enriched by estimating a temperature-dependent friction coefficient using theoretical relationships, and by considering a temperaturedependent multilinear isotropic hardening equation as a plasticity model representing the material. Both quantitative determinations are confirmed through experimental data collected on the real material. Finally, the contact conditions are modeled using the modified Coulomb criterion. The results of the model are in agreement with actual results observed on experimental applications. The study proves that the rotational speed of the tool is the most determinant factor in the results. As it rises, the friction-generated heat flow is higher. This study shows that the compressive stress-strain data in strain rate of 10s-1 is a good approximation of the plasticity behavior of aluminum alloy during the friction stir welding.
CitacióAmini, C. [et al.]. Friction stir welding of AA2024-T3: development of numerical simulation considering thermal history and heat generation. "International journal of advanced manufacturing technology", 15 Maig 2021, vol. 2021, p. 1-20.
ISSN0268-3768
Versió de l'editorhttps://link.springer.com/article/10.1007%2Fs00170-021-07184-2
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Authors_proof.pdf | 3,648Mb | Visualitza/Obre |