Comparison of different low-cost sensors for structural health monitoring
Visualitza/Obre
31815169.pdf (192,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/347119
Tipus de documentText en actes de congrés
Data publicació2020
EditorCRC Press
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Recently, the need for Structural Health Monitoring (SHM) and inspection is growing as a result of the increasing age of the structural stock worldwide. SHM includes bringing into use a sensor or an array of sensors into an engineered structure. This paper evaluates the practical aspects to consider when choosing different low-cost sensors for using in a SHM application. For this reason, a microcontroller (Arduino) with attached sensors (Ultrasonic, Laser, Gyroscope, Accelerometer, Temperature-humidity, SD-module) has been used throughout different controlled ambient situations and experiments. During the sensor installation and data acquisition, some issues related to the Arduino codes and position of the sensors arise. In this article solutions for tackling faced problems have been presented for achieving an efficient way of using these electronic devices. Their data have been collected to assess and compare their tolerances as well as advantages and disadvantages of their use, cost among them. The information from this article could be used either to choose the appropriate sensors either for static or for dynamic Structural System Identification (SSI).
CitacióKomarizadehasl, S. [et al.]. Comparison of different low-cost sensors for structural health monitoring. A: International Conference on Bridge Maintenance, Safety and Management. "Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations: proceedings of the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), June 28-July 2, 2020, Sapporo, Japan". CRC Press, 2020, p. 1-7. ISBN 9780429279119.
ISBN9780429279119
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
31815169.pdf | 192,8Kb | Accés restringit |