High temperature cyclic oxidation behavior of low manganese Fe12Mn9Cr5Si4Ni-NbC shape memory stainless steels
Visualitza/Obre
10.1016/j.jallcom.2020.158198
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/344819
Tipus de documentArticle
Data publicació2021-03-15
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
High amounts of Mn in Fe-Mn-Si-Cr-Ni shape memory stainless steels are detrimental for oxidation resistance at high temperatures. However, in order to maintain the shape memory effect of these alloys the content of manganese must be between 12 and 19 wt%. Thus, this study evaluated an alloy with relative low Mn (12 wt%) in cyclic oxidation tests at 800, 900 and 1000 °C. Kinetic analysis demonstrated parabolic oxidation behavior with rate similar to higher Mn-containing alloys from literature. It was also observed internal oxidation, for the first time in these alloys, and oxide layers composed by Mn2O3 and Mn-Cr spinel at 800 °C as well as Mn-Cr spinel and no continuous silica at 1000 °C. The internal oxidation mechanism was related to oxide layer defects and not to partial oxygen pressure decrease, considering that the internal oxidation presented the same oxides of the external layer. These results show that low Mn content does not improve the use viability of these alloys at high temperatures, since no decreasing in oxidation rate was observed and further internal oxidation occurred.
CitacióDe Sousa, A. [et al.]. High temperature cyclic oxidation behavior of low manganese Fe12Mn9Cr5Si4Ni-NbC shape memory stainless steels. "Journal of alloys and compounds", 15 Març 2021, vol. 857, p. 158198:1-158198:9.
ISSN0925-8388
Versió de l'editorhttps://doi.org/10.1016/j.jallcom.2020.158198
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
JALCOM-D-20-11372_R1-1.pdf | 2,123Mb | Visualitza/Obre |