GSS - Grup Sistemes Sensors
La recerca del grup està orientada als sistemes d'instrumentació i mesura basats en sensors. L'activitat del grup inclou la concepció del sistema, el disseny del sensor, l'electrònica addicional i el processament i tractament de les dades. Els mètodes de mesura emprats inclouen entre d'altres, els ultrasons, els infrarojos i els camps electromagnètics. Les aplicacions d’interès principals són els assajos no destructius, les imatges per ultrasons, l’espectroscòpia infraroja i els sensors per a la mesura de la qualitat dels aliments.
The group's research is focused on the areas of ultrasound, infrared and smart sensor-based systems. The main research topics are non-destructive testing and evaluation (NDT/E), ultrasonic imaging, infrared spectroscopy, sensors for food quality assessment, thermoelectric cooling, and fibre optic sensors.
The group's research is focused on the areas of ultrasound, infrared and smart sensor-based systems. The main research topics are non-destructive testing and evaluation (NDT/E), ultrasonic imaging, infrared spectroscopy, sensors for food quality assessment, thermoelectric cooling, and fibre optic sensors.
Collections in this community
-
Articles de revista [13]
-
Llibres [16]
Recent Submissions
-
Impact of the pandemic on the teaching and research staff at a technological university in Spain: deepening the gender gap
(2022-05-25)
Article
Open AccessThe alteration of the educational model caused by the COVID-19 pandemic has not affected all university faculty equally. This work explores the academic, digital and gender inequalities caused by the pandemic on the teaching ... -
Proceso de diseño y fabricación de una placa de circuito impreso (PCB)
(2020-01-01)
Book
Open AccessSe describen las características principales de las placas de circuito impreso (PCB). En el primer apartado se presenta una breve historia de las PCB. Posteriormente, se abordan los procesos de diseño y de fabricación de ... -
El mundo Internet of Things (IoT)
(Ceské vysoké ucení technické v Praze Fakulta elektrotechnická, 2019-12-31)
Book
Open AccessSe describe el mundo del Internet de las Cosas (IoT). Se introducen las principales tecnologías involucradas en el uso de IoT. Se describen también los dispositivos y plataformas IoT. Finalmente, se muestra una lista de ... -
Multichannel QCM-based system for continuous monitoring of bacterial biofilm growth
(2020-06)
Article
Open AccessQuartz crystal microbalance (QCM) sensors are becoming a good alternative to analytical methods for the measurement of bacterial growth in liquid media culture. For this purpose, two essential resonance parameters allow ... -
The world of IoT
(Czech Technical University, 2019-10-02)
Book
Open AccessThis book describes the world of Internet of things (IoT). Main technologies involved in the use of IoT are introduced. Moreover, IoT devices and platforms are also described in this module. Finally, a list of real IoT ... -
Desky plošných spoju (DPS) – návrh a výroba
(Czech Technical University in Prague, 2019-06-13)
Book
Open AccessTento materiál popisuje hlavní charakteristiky desek plošných spoju (DPS). V první kapitole je shrnuta strucná historie. Dále jsou popsány procesy návrhu a výroby DPS a nakonec je v poslední kapitole uvedena ... -
Svet Internetu vecí
(Czech Technical University of Prague. Faculty of Electrical Engineering, 2019-05-01)
Book
Open AccessTento modul popisuje svet Internetu vecí z anglického Internet of Things (IoT). Predstavuje hlavní technologie používané v Internetu vecí spolu s platformami a IoT zarízeními. Seznam reálných aplikací v Internetu vecí je ... -
Printed Circuit Board (PCB) design process and fabrication
(Czech Technical University of Prague. Faculty of Electrical Engineering, 2019-05-06)
Book
Open AccessThis module describes main characteristics of Printed Circuit Boards (PCBs). A brief history of PCBs is introduced in the first chapter. Then, the design processes and the fabrication of PCBs are addressed and finally a ... -
Effect of angle errors in conical tip buffer rods
(Institute of Electrical and Electronics Engineers (IEEE), 2011)
Conference report
Restricted access - publisher's policyBuffer rods are usually plastic or metallic solid cylinders of known acoustic properties, which are placed between the ultrasonic transducer and the sample under study. For some applications, the buffer rod end in contact ... -
Design and implementation of an ultrasonic sensor for rapid monitoring of industrial malolactic fermentation of wines
(2017-12-19)
Article
Open AccessUltrasound is an emerging technology that can be applied to monitor food processes. However, ultrasonic techniques are usually limited to research activities within a laboratory environment and they are not extensively ... -
Internet vecí
(European Virtual Learning Platform for Electrical and Information Engineering, 2017-11-06)
Book
Open AccessTento kurz je úvodem do problematiky internetu vecí (IoT – Internet of Things). V prvních kapitolách najdete základní informace týkající se IoT. Následuje prehled nejduležitejších vlastností protokolu, který se v oblasti ... -
Linearity error in Clamp-on ultrasonic flowmeters due to the installation on pipes made of dispersive materials
(Institute of Electrical and Electronics Engineers (IEEE), 2017)
Conference report
Open AccessThis article analyses and explains the implications that dispersive materials have over the linearity in flow measurement when a Clamp-on ultrasonic flowmeter is used. This is of capital importance because dispersive ...
RSS 1.0