Show simple item record

dc.contributor.authorRiba Ruiz, Jordi-Roger
dc.contributor.authorMartínez Reyes, Jimmy Arturo
dc.contributor.authorMoreno Eguilaz, Juan Manuel
dc.contributor.authorCapelli, Francesca
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Enginyeria Elèctrica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2021-04-19T13:29:25Z
dc.date.issued2021-04
dc.identifier.citationRiba, J. [et al.]. Characterizing the temperature dependence of the contact resistance in substation connectors. "Sensors and actuators A. Physical", Abril 2021, vol. 327, p. 1-9.
dc.identifier.issn0924-4247
dc.identifier.urihttp://hdl.handle.net/2117/343897
dc.description.abstractThe electrical resistance, and in particular, the electrical contact resistance (ECR), plays a critical role in the electrical and thermal behaviors of substation connectors. Despite its impact, there are very few research works analyzing the temperature dependence of the ECR and its terms, the constriction and film resistances. It is very important to understand the contribution of the ECR to the total resistance, and its dependence on temperature. This work studies these dependences in detail by analyzing two types of connectors, i.e., connectors intended to join tubular bus bars, and connectors for stranded conductors. Due to the specific features of bus bars and stranded conductors, the ECR of both conductors has a different impact on the total resistance. The experimental approach presented in this work can be applied to better understand the role of the contact resistance, allowing the design of improved and more reliable substation connectors and similar devices.
dc.description.sponsorshipThis work was supported in part by the Ministerio de Ciencia e Innovación de España, under grant number RTC-2017-6297-3 and by the Generalitat de Catalunya under grant number 2017 SGR 967.
dc.format.extent9 p.
dc.language.isoeng
dc.publisherElsevier
dc.subjectÀrees temàtiques de la UPC::Enginyeria elèctrica
dc.subject.lcshElectric resistance
dc.subject.lcshElectric connectors
dc.subject.otherContact resistance
dc.subject.otherSubstation connectors
dc.subject.otherPredictive maintenance
dc.subject.otherRemaining useful life
dc.subject.otherFault diagnosis
dc.titleCharacterizing the temperature dependence of the contact resistance in substation connectors
dc.typeArticle
dc.subject.lemacResistència elèctrica
dc.subject.lemacConnectors elèctrics
dc.contributor.groupUniversitat Politècnica de Catalunya. MCIA - Motion Control and Industrial Applications Research Group
dc.identifier.doi10.1016/j.sna.2021.112732
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/abs/pii/S0924424721001953
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac30946609
dc.description.versionPostprint (author's final draft)
dc.relation.projectidinfo:eu-repo/grantAgreement/AGAUR/2PE/2017 SGR 967
dc.relation.projectidinfo:eu-repo/grantAgreement/MICINN/2PE/RTC-2017-6297-3
dc.date.lift2023-08
local.citation.authorRiba, J.; Martinez, J.; Moreno-Eguilaz, J.M.; Capelli, F.
local.citation.publicationNameSensors and actuators A. Physical
local.citation.volume327
local.citation.startingPage1
local.citation.endingPage9


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder