Show simple item record

dc.contributor.authorCailloux, Jonathan
dc.contributor.authorGarcía Masabet, Violeta del Valle
dc.contributor.authorLoaeza Becerril, Alfonso David
dc.contributor.authorCarrasco Alonso, Félix Ángel
dc.contributor.authorMaspoch Rulduà, Mª Lluïsa
dc.contributor.authorSantana Pérez, Orlando Onofre
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Ciència i Enginyeria dels Materials
dc.date.accessioned2021-04-13T13:02:29Z
dc.date.available2021-04-13T13:02:29Z
dc.date.issued2020
dc.identifier.citationCailloux, J. [et al.]. PLA/BIOPA bioblends for FDM: Mechanica and fracture behavior. A: 37 Congreso del Grupo Español de Fractura - 1st virtual Iberian Conference on Estructural Integrity. "Anales de Mecánica de la fractura". 2020, p. 188-194. ISBN 0213-3725.
dc.identifier.isbn0213-3725
dc.identifier.otherhttps://gef.es/images/publicaciones-zip/37_GEF_2020_Virtual.pdf
dc.identifier.urihttp://hdl.handle.net/2117/343672
dc.description.abstractThe fracture behaviour of PLA/PA bioblends has been investigated in order to extend its processing through fused deposition modeling printing by pellets supply (FDM-p). The viability of the processing technique in creating in situ microfibrillated composites (MFCs) through the microfibrillation of the PA dispersed phase has been evaluated as a way to strengthen and toughen PLA. The mechanical behaviour was assessed through uniaxial tensile tests performed at room temperature (22oC) using type 1BA dumbbell tensile test specimens (ISO527-2) featuring an unidirectional infill pattern fully oriented in the longitudinal direction of the samples. The fracture behaviour was assessed through the determination of the CTOD value just before the crack propagation onset in single-edge-notched tension (SENT) test geometry featuring a multi-axial multilayer infill pattern. For all the samples, a nominal filling density of 100 % was predefined. Morphological observations revealed that the 3D printing conditions used in this study allowed the manufacturing of in- situ MFCs with an average diameter of the PA microfibrils as low as 320 nm. The developed morphology led to a significant increase in the structural integrity of the parts manufactured through FDM-p, as clearly evidenced by the 206% increase in the CTOD values as compared to samples obtained through conventional compression-moulding using the same raw pellets.
dc.format.extent7 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshFracture mechanics
dc.subject.otherFractura
dc.subject.otherFDM
dc.subject.otherPLA
dc.titlePLA/BIOPA bioblends for FDM: Mechanica and fracture behavior
dc.typeConference lecture
dc.subject.lemacMecànica de fractura
dc.contributor.groupUniversitat Politècnica de Catalunya. e-PLASCOM - Plàstics i Compòsits Ecològics
dc.rights.accessOpen Access
local.identifier.drac30710910
dc.description.versionPostprint (published version)
local.citation.authorCailloux, J.; Garcia, V.; Loaeza, A.; Carrasco, F.; Maspoch, M.; Santana, O.
local.citation.contributor37 Congreso del Grupo Español de Fractura - 1st virtual Iberian Conference on Estructural Integrity
local.citation.publicationNameAnales de Mecánica de la fractura
local.citation.startingPage188
local.citation.endingPage194


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record