Computational image analysis as an alternative tool for the evaluation of corrosion in salt spray test
Visualitza/Obre
10.24193/subbchem.2020.3.04
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/343640
Tipus de documentArticle
Data publicació2020-01-01
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The current standards for evaluating corrosion during salt spray tests rely on the visual analysis of the specimens, and this may be a limitation when higher resolution quantitative outputs are desired. In this work, computational image analysis was used to measure the area affected by corrosion during salt spray tests with aluminum alloy, copper, carbon steel and galvanized steel plates. The software ImageJ was used to select and measure the corroded areas differentiating the corrosion products from the metals uncorroded surfaces according to their different colors. With ten measurements for each selected exposure time, a 95 % confidence interval was calculated for each material and time of exposure, giving an indication of the precision of the estimated corroded area. These data were compared with a visual inspection carried out by an experienced technician. The results indicate that computational image analysis may be a powerful tool to obtain higher resolution in the results interpretation in comparison with the standard visual analysis
CitacióBonamigo, V. [et al.]. Computational image analysis as an alternative tool for the evaluation of corrosion in salt spray test. "Studia Universitatis Babes-Bolyai Chemia", 1 Gener 2020, vol. 65, núm. 3, p. 45-61.
ISSN2065-9520
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
04Moreira_etal_45_61.pdf | 2,127Mb | Visualitza/Obre |