Show simple item record

dc.contributor.authorBou Serra, Jordi
dc.contributor.authorBinti Shaarani, Farra Wahida
dc.contributor.authorBin Raja-Nazri, Raja Nazrul Hakim
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Química
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Enginyeria de Processos Químics
dc.date.accessioned2021-04-06T07:36:46Z
dc.date.available2021-04-06T07:36:46Z
dc.date.issued2019-08-27
dc.identifier.citationBou, J.J.; Binti Shaarani, F.; Bin, R. Production of poly(carbonate-co-ether) via catalytic polymerization of epoxidized linseed oil, propylene oxide and carbon dioxide. "IOP conference series: materials science and engineering", 27 Agost 2019, vol. 548, núm. 12019, p. 1-7.
dc.identifier.issn1757-899X
dc.identifier.urihttp://hdl.handle.net/2117/343113
dc.description.abstractPoly-(carbonate-co-ether) was synthesized via catalytic polymerization between epoxidized linseed oil (ELO), propylene oxide (PO) and carbon dioxide (CO2) using heterogeneous catalyst namely Co-Zn double metal cyanide (Co-Zn DMC). The influence of polymerization time was studied. It was revealed that the properties of the resultant polymers were affected by the polymerization time. Within the range of polymerization time studied, the maximum average molecular weight (Mn) of the resultant polymer obtained was 6.21 × 105 g·mol-1 with polydispersity index (PDI) of 1.05 at reaction time of 24 hours.
dc.format.extent7 p.
dc.language.isoeng
dc.publisherInstitute of Physics (IOP)
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria química
dc.subject.lcshPolymerization
dc.subject.lcshPolymers
dc.subject.lcshGreenhouse gases
dc.subject.lcshRenewable energy sources
dc.titleProduction of poly(carbonate-co-ether) via catalytic polymerization of epoxidized linseed oil, propylene oxide and carbon dioxide
dc.typeArticle
dc.subject.lemacPolicarbonats
dc.subject.lemacPolimerització
dc.subject.lemacPolímers
dc.subject.lemacGasos d'efecte hivernacle
dc.subject.lemacEnergies renovables
dc.identifier.doi10.1088/1757-899X/548/1/012019
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://iopscience.iop.org/article/10.1088/1757-899X/548/1/012019
dc.rights.accessOpen Access
local.identifier.drac30863834
dc.description.versionPostprint (published version)
local.citation.authorBou, J. J.; Binti Shaarani, F.; Bin, R.
local.citation.publicationNameIOP conference series: materials science and engineering
local.citation.volume548
local.citation.number012019
local.citation.startingPage1
local.citation.endingPage7


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain