Simulación y análisis de un proceso de estampación de una semi-concha
Visualitza/Obre
TFG_Marc_Valldeoriola_Antonell.pdf (3,585Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/340629
Tipus de documentTreball Final de Grau
Data2019-07-17
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The following project is a study of a stamping process. To carry out the study, a simulation
has been done using finite elements with the software PAM STAMP®. After the simulation,
an experimental validation was made to compare the results with the purpose of verifying the
reliability of the simulation.
The project starts with the component specifications: a semi-shell that will be part of a silencer
of an exhaust system. Afterwards, the characteristics of the material and the process are
explained in detail. Once the details are known, the simulation is explained step by step. The
simulation is compared with an analysis of thicknesses and defects of real samples.
To conclude, environmental improvements are proposed for the process. Also, an extra
simulation has been done to try to improve the process.
MatèriesAutomobiles -- Equipment and supplies, Metal stamping, Stainless steel, Finite element method -- Data processing, Automòbils -- Equip i accessoris, Estampació, Acer inoxidable, Elements finits, Mètode dels -- Informàtica
TitulacióGRAU EN ENGINYERIA MECÀNICA (Pla 2016)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TFG_Marc_Valldeoriola_Antonell.pdf | 3,585Mb | Accés restringit |