Photoproduction of hydrogen in microreactors: catalytic coating or slurry configuration?
Visualitza/Obre
10.1016/j.cattod.2020.08.021
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/340500
Tipus de documentArticle
Data publicació2020-01-01
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A quartz microreactor containing 28 microchannels of 500 µm width and 105 mm length has been used to photoproduce hydrogen from liquid water-ethanol using an Au/TiO2 photocatalyst and UV light. The photomicroreactor has been tested in two flow configurations: (i) as a catalytic wall photoreactor by coating the microchannels with the photocatalyst, and (ii) as a slurry photoreactor by dispersing the photocatalyst in the liquid mixture of water-ethanol. The catalytic wall photoreactor configuration shows superior performance, with hydrogen yields more than three times higher than those obtained with the best slurry configuration under the same operation conditions.
CitacióChausse, V.; Llorca, J. Photoproduction of hydrogen in microreactors: catalytic coating or slurry configuration? "Catalysis today", 1 Gener 2020,
ISSN0920-5861
Versió de l'editorhttps://www.sciencedirect.com/science/article/abs/pii/S0920586120305848
Col·leccions
- NEMEN - Nanoenginyeria de materials aplicats a l'energia - Articles de revista [244]
- Doctorat en Ciència i Enginyeria dels Materials - Articles de revista [155]
- Departament d'Enginyeria Química - Articles de revista [2.214]
- BBT - Grup de recerca en Biomaterials, Biomecànica i Enginyeria de Teixits - Articles de revista [438]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
revised article_victor.pdf | 1,056Mb | Visualitza/Obre |