Modificació de la superfície de teixits de polièster per obtenir el confort permanent
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/340445
Correu electrònic de l'autor1esoa17guiradogmail.com
Tipus de documentTreball Final de Grau
Data2020-07-14
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Un dels teixits actuals més utilitzats en la indústria tèxtil és el polièster (PET), tant per les seves
propietats físiques i químiques, com pel seu cost assequible per a tothom. No obstant, és un material
hidròfob, per tant, no transporta ni dispersa l’aigua líquida alliberada del cos.
L’eliminació de calor i aigua del cos permet millorar el nivell de confort. Per tant, si la transpiració queda
atrapada arran o a prop de la pell, pot provocar un augment de la temperatura corporal, causant
deshidratació, fatiga i disminució del rendiment.[1]
És per això que actualment s’estan realitzant experiments per tal de millorar aquesta propietat del PET
mitjançant la modificació superficial del teixit.
En aquest projecte es pretén augmentar el benestar i el confort del PET augmentant la seva hidrofilitat
amb la modificació de la superfície del mateix. Per això, s’han aplicat tres tractaments diferents a
mostres del teixit que han estat impregnades amb glicerol i aigua, avaluant així la permeabilitat del PET
amb glicerol. A més, s’han realitzat els tractaments a mostres impregnades amb glicerol i NaOH per tal
de comprovar si l’hidròxid de sodi, degut a la seva facilitat per adherir-se a les fibres, segons estudis
realitzats [2], millora la penetració del glicerol i s’obtenen millors resultats.
Els tractaments utilitzats són per esgotament en bany termoestàtic de va-i-ve a 40ºC durant una hora,
i per microones, estudiant també un possible pretractament amb plasma de corona. Uno de los tejidos actuales más utilizados en la industria textil es el poliéster (PET), tanto por sus
propiedades físicas y químicas, como por su coste asequible para todos. Sin embargo, es un material
hidrófobo, por tanto, no transporta ni dispersa el agua líquida liberada del cuerpo.
La eliminación de calor y agua del cuerpo permite mejorar el nivel de confort. Por lo tanto, si la
transpiración queda atrapada a ras o cerca de la piel, puede provocar un aumento de la temperatura
corporal, causando deshidratación, fatiga y disminución del rendimiento. [1]
Es por ello por lo que, actualmente se están realizando experimentos para mejorar esta propiedad del
PET mediante la modificación superficial del tejido.
En este proyecto se pretende aumentar el bienestar y el confort del PET aumentando su hidrofilidad
con la modificación de la superficie de este. Por ello, se han aplicado tres tratamientos diferentes a
muestras del tejido que han sido impregnadas con glicerol y agua, evaluando así la permeabilidad del
PET con glicerol. Además, se han realizado los tratamientos a muestras impregnadas con glicerol y
NaOH para comprobar si el hidróxido de sodio, debido a su facilidad para adherirse a las fibras, según
estudios realizados [2], mejora la penetración del glicerol y se obtienen mejores resultados.
Los tratamientos utilizados son por agotamiento en baño termostático de va-y-ven a 40ºC durante una
hora, y por microondas, estudiando también un posible pretratamiento con plasma de corona. One of the most used fabrics in the textile industry today is polyester (PET), because of its physical and
chemical properties and for its affordable cost for everybody. However, it is a hydrophobic material,
therefore it does not transport or disperse the liquid water released from the body.
The elimination of heat and water from the body improves the comfort level. Therefore, if perspiration
is trapped close to the skin, it can cause an increase in body temperature, causing dehydration, fatigue,
and decreased performance. [1]
That is why, currently, experiments are being carried out to improve this property of PET by superficial
modification of the tissue.
This project aims to increase the well-being and comfort of PET by increasing its hydrophilicity by
modifying its surface. For this reason, three different treatments have been applied to tissue samples
that have been impregnated with glycerol and water, thus evaluating the permeability of PET with
glycerol. In addition, treatments have been carried out on samples impregnated with glycerol and
NaOH to check whether sodium hydroxide, due to its ease of adhering to fibers, according to studies
[2], improves the penetration of glycerol and better results are obtained.
The treatments used are by exhaustion bath at 40ºC for one hour, and by microwave, also studying a
possible pre-treatment with corona plasma.
TitulacióGRAU EN ENGINYERIA QUÍMICA (Pla 2009)
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TFG_Guirado_Yolanda.pdf | 766,4Kb | Visualitza/Obre |