UPCommons està en procés de migració del dia 10 fins al 14 Juliol. L’autentificació està deshabilitada per evitar canvis durant aquesta migració.
Estudi CFD d’una Vàlvula Papallona de l’àmbit energètic

View/Open
Cita com:
hdl:2117/335738
Author's e-mailsergisayos94
gmail.com

Document typeBachelor thesis
Date2020-07-14
Rights accessOpen Access
This work is protected by the corresponding intellectual and industrial property rights.
Except where otherwise noted, its contents are licensed under a Creative Commons license
:
Attribution 3.0 Spain
Abstract
Amb l’enorme progrés que s’ha realitzat en els softwares dedicats al càlcul i simulació per elements finits i, concretament, als enfocats a la mecànica de fluids, s’ha aconseguit augmentar considerablement tant el nivell d’exactitud dels resultats com la facilitat relativa per relacionar-se amb l’entorn. És per això que es poden dur a terme càlculs i obtenir resultats de gran complexitat amb un temps relativament baix.
L’objectiu del treball consisteix a fer l’estudi fluidodinàmic d’una vàlvula papallona del sector hidroelèctric mitjançant el mètode dels elements finits aplicats a la branca de la mecànica de fluids. Per a fer l’estudi utilitzarem el software ANSYS Fluent per a la simulació i el software Solidworks per a la simplificació, modificació i millora de la geometria.
L’estudi té dos objectius específics, els quals són l’estudi i reducció de la pèrdua de càrrega i l’estudi i reducció de risc de la cavitació. Un cop la simulació amb la geometria original ha conclòs, s’ha buscat millorar dita geometria i comprovar la viabilitat de la millora efectuada i les seves conseqüències analitzant, comparant i justificant els resultats envers el model original. Debido al enorme progreso que se ha realizado en los softwares dedicados al cálculo y simulación mediante los elementos finitos y, concretamente, a los enfocados a la mecánica de fluidos, se ha conseguido aumentar considerablemente tanto en nivel de exactitud de los resultados como en facilidad relativa de adaptación al entorno. Es por esto que se pueden llevar a cabo cálculos y obtener resultados de gran complejidad en un tiempo relativamente bajo.
El objetivo del trabajo consiste en realizar el estudio fluidodinámico de una válvula mariposa del sector hidroeléctrico mediante el método de los elementos finitos aplicados a la rama de la mecánica de fluidos. Para realizar el estudio usaremos el software ANSYS Fluent para la simulación y el software Solidworks para la simplificación y modificación de la geometría.
El estudio tiene dos objetivos específicos, los cuales son el estudio y reducción de la pérdida de carga y la reducción del riesgo de cavitación. Una vez la simulación con la geometría original ha concluido, se ha buscado la mejora de dicha geometría y la comprobación de la viabilidad de la mejora efectuada analizando, comparando y justificando los resultados junto al modelo original. Given the huge advances produced in software dedicated to the calculus and simulation by finite elements and, specifically, on fluid mechanics, a remarkable increase has been achieved both in the accuracy level of results and the relative facility to interact with the environment. This is why it is possible now to do calculus and obtain high complexity results in a relatively short time.
The aim of this report consists of doing a fluid dynamic study of a butterfly valve of the hydroelectrically sector by the method of the finite elements applied to the fluid mechanic engineering. For this study we will use the ANSYS Fluent software for the simulation and the Solidworks software for the simplification and modification of geometry.
The study has two specific aims, the reduction of the pressure drop and the study and reduction of the risk of cavitation. After the simulation of the original geometry has been computed, copy of the simulation with the original geometry has been concluded, it has been improved and checked the viability of this by analyzing, comparing and justifying the results against the original model.
DegreeGRAU EN ENGINYERIA MECÀNICA (Pla 2016)
Files | Description | Size | Format | View |
---|---|---|---|---|
TFG_CFD_Butterfly_Valve.pdf | 4,302Mb | View/Open |