Show simple item record

dc.contributor.authorBolmaro, Raúl
dc.contributor.authorMoreira Jorge Júnior, Alberto
dc.contributor.authorZhilyaev, Alexander P.
dc.contributor.authorCabrera Marrero, José M.
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials
dc.date.accessioned2021-01-14T14:50:20Z
dc.date.issued2020-06-20
dc.identifier.citationBolmaro, R. [et al.]. Prediction of generation of High- and Low-Angle Grain Boundaries (HAGB and LAGB) during severe plastic deformation. "Metallurgical and materials transactions A-Physical metallurgy and material", 20 Juny 2020, vol. 51A, p. 4674-4684.
dc.identifier.issn1073-5623
dc.identifier.urihttp://hdl.handle.net/2117/335357
dc.description.abstractIt is well known that a balance between the generation of low-angle and high-angle grain boundaries (LABG and HAGB) is achieved in materials undergoing a severe plastic deformation (SPD) process. It is also observed that most annealed materials evolve from a substantial fraction of LAGB at the early deformation steps towards a steady state in which an equilibrium between LAGB and HAGB fractions is attained. In the present work, such a balance is analyzed for different alloys, i.e., Cu, Al, and Fe based. A mathematical expression is proposed for the amount of LAGB and HAGB as a function of the strain impaired which in turn can be used to predict the number of passes (especially for ECAP) or the amount of total deformation for any SPD process necessary to attain a steady microstructure. The model seeks to serve as a first approximation of the mechanical and microstructural properties of ultrafine grain metal materials.
dc.format.extent11 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia
dc.titlePrediction of generation of High- and Low-Angle Grain Boundaries (HAGB and LAGB) during severe plastic deformation
dc.typeArticle
dc.subject.lemacPlàstics
dc.contributor.groupUniversitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics
dc.identifier.doi10.1007/s11661-020-05873-3
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://link.springer.com/article/10.1007%2Fs11661-020-05873-3
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac29238917
dc.description.versionPostprint (author's final draft)
dc.date.lift2021-06-30
local.citation.authorBolmaro, R.; Moreira, A.; Zhilyaev, A.; Cabrera, J.
local.citation.publicationNameMetallurgical and materials transactions A-Physical metallurgy and material
local.citation.volume51A
local.citation.startingPage4674
local.citation.endingPage4684


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain