Wireless sensing of concrete setting process
Visualitza/Obre
Cita com:
hdl:2117/335013
Tipus de documentArticle
Data publicació2020-10-21
EditorMultidisciplinary Digital Publishing Institute (MDPI)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial 3.0 Espanya
ProjecteSISTEMAS RADIANTES X-WAVE INTEGRADAS DE COMUNICACIONES Y SENSORIZACION (AEI-PID2019-107885GB-C31)
Abstract
An RFID-based wireless system to measure the evolution of the setting process of cement-based materials is presented in this paper. The system consists of a wireless RFID temperature sensor that works embedded in concrete, and an external RFID reader that communicates with the embedded sensor to extract the temperature measurement conducted by the embedded sensor. Temperature time evolution is a well known proxy to monitor the setting process of concrete. The RFID sensor consisting of an UWB Bow Tie antenna with central frequency 868 MHz, matched to the EM4325 temperature chip through a T-match structure for embedded operation inside concrete is fully characterized. Results for measurements of the full set up conducted in a real-scenario are provided
CitacióGonzalez, G. [et al.]. Wireless sensing of concrete setting process. "Sensors", 21 Octubre 2020,
ISSN1424-8220
Versió de l'editorhttps://www.mdpi.com/1424-8220/20/20/5965
Col·leccions
- Departament d'Enginyeria de Projectes i de la Construcció - Articles de revista [360]
- Departament de Teoria del Senyal i Comunicacions - Articles de revista [2.528]
- ANTENNALAB - Grup d'Antenes i Sistemes Radio - Articles de revista [195]
- Departament d'Enginyeria Civil i Ambiental - Articles de revista [3.026]
- EC - Enginyeria de la Construcció - Articles de revista [343]
- Doctorat en Teoria del Senyal i Comunicacions - Articles de revista [211]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
sensors-20-05965.pdf | 6,203Mb | Visualitza/Obre |