Mostrar el registro sencillo del ítem

dc.contributor.authorJung, Simon
dc.contributor.authorPeetz, Sebastian
dc.contributor.authorKoch, Michael
dc.date.accessioned2020-12-23T16:06:59Z
dc.date.available2020-12-23T16:06:59Z
dc.date.issued2019
dc.identifier.citationJung, S.; Peetz, S.; Koch, M. POEAM – a method for the Part Orientation Evaluation for Additive Manufacturing. A: Sim-AM 2019. "Sim-AM 2019 : II International Conference on Simulation for Additive Manufacturing". CIMNE, 2019, p. 440-443. ISBN 978-84-949194-8-0.
dc.identifier.isbn978-84-949194-8-0
dc.identifier.urihttp://hdl.handle.net/2117/334903
dc.description.abstractIn the industrial application of additive manufacturing processes, a significant amount of time and resources is dedicated to the orientation and pre- print setup of the geometry. Steps such as the generation of support structures and the process simulation are among the most time-consuming. For the thorough assessment of an orientation of a given geometry, even more criteria, like print time or surface quality, need to be considered. POEAM proposes a method for an efficient assessment of a set of orientations, by means of well formulated criteria and an early elimination of insufficient orientations. The goal is to narrow the search field, so costly preparation steps will only be performed on orientations that promise a superior end result. Furthermore, POEAM is an automated process, which means it can be performed with minimal human interaction, resulting in an optimum regarding cost- efficiency and evaluation time. The method was applied to a representative geometry and has shown results that confirm the above mentioned advantages.
dc.format.extent4 p.
dc.language.isoeng
dc.publisherCIMNE
dc.rightsOpen access
dc.subjectÀrees temàtiques de la UPC::Matemàtiques i estadística::Anàlisi numèrica::Mètodes en elements finits
dc.subject.lcshFinite element method
dc.subject.lcshDigital computer simulation
dc.titlePOEAM – a method for the Part Orientation Evaluation for Additive Manufacturing
dc.typeConference report
dc.subject.lemacSimulació per ordinador digital
dc.rights.accessOpen Access
local.citation.contributorSim-AM 2019
local.citation.publicationNameSim-AM 2019 : II International Conference on Simulation for Additive Manufacturing
local.citation.startingPage440
local.citation.endingPage443


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Todos los derechos reservados.Esta obra está protegida por los derechos de propiedad intelectual e industrial. Sin perjuicio de las exenciones legales existentes, queda prohibida su reproducción, distribución, comunicación pública o transformación sin la autorización del titular de los derechos