Large eddy simulation of the flow past the DTMB5415 surface combatant hull with and without bilge keels
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/333290
Tipus de documentText en actes de congrés
Data publicació2011
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The flow around the DTMB5415 surface combatant hull with and without
bilge keels is studied numerically by the use of a Large Eddy Simulation (LES) method.
The main purpose for bilge keels is to reduce roll motions when operating in ocean waves.
The flow resistance should at the same time be affected as little as possible. The computations
presented here are for straight course in calm water conditions and show only a
small change in the wake of the hull and there by a minimal effect on the resistance. The
computations are made as a preparatory step before investigating other conditions, such
as yaw angle.
CitacióSvennberg, U. [et al.]. Large eddy simulation of the flow past the DTMB5415 surface combatant hull with and without bilge keels. A: . CIMNE, 2011, p. 605-616.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Marine-2011-47_LARGE EDDY SIMULATION.pdf | 430,0Kb | Visualitza/Obre |