Show simple item record

dc.contributorLlorca Piqué, Jordi
dc.contributorSerrano Carreño, M. Isabel
dc.contributor.authorAnadón Martínez, Verónica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Química
dc.date.accessioned2020-11-18T16:14:14Z
dc.date.available2020-11-18T16:14:14Z
dc.date.issued2020-07-09
dc.identifier.urihttp://hdl.handle.net/2117/332477
dc.description.abstractThe objective of this thesis is to study the hydrogen production according to the preparation of photocatalysts with mechanochemical methods from semiconductors such as titanium dioxide. The preparation of the photocatalysts and their assay were performed in a laboratory with a photoreactor. In this way it was possible to determine by the different techniques and chemical compositions, which formulation was the most effective. The mechanochemical methods are simple and environmentally friendly because no solvents are used; they are faster and easily reproducible. The technique by which the experiments were performed is called ball milling. This method is a is a mechanical technique widely used to grind powders into fine particles and blend materials. The samples used for this study were a mixture of titanium dioxide (TiO2) with different chemical compositions of another semiconductor. These were tin (IV) oxide (SnO2), zinc oxide (ZnO), copper (II) oxide (CuO), cadmium sulphide (CdS) and zinc sulphide (ZnS). Once the sample was obtained by ball milling from different compositions of 90% TiO2 plus 10% from another semiconductor mentioned before, its reactivity was analysed in a laboratory photoreactor to determine how much hydrogen produces each photocatalyst. This analysis has determined that the photocatalyst that achieves the best results in terms of hydrogen production is the combination of 90% TiO2 and 10% CuO, since CuO semiconductor has a smaller band gap than the other semiconductors analysed. Therefore, the semiconductors that had a higher band gap, such as ZnO or ZnS, were the ones that obtained the worst results, except for the SnO2 photocatalyst, as it was the second photocatalyst that worked best. Therefore, according to the results obtained, it has been determined that not only the semiconductor band gap must be considered when preparing a photocatalyst, but also the position of the CB and VB of each semiconductor, to be able to determine which combination of elements is most suitable.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Energies
dc.subject.lcshHydrogen as fuel
dc.subject.lcshPhotocatalysis
dc.subject.otherHydrogen, Photocatalyst, Ball milling, Band gap, Valence band (VB), Conduction band (CB), Semiconductor, Mechanochemical method, Photoreactor
dc.titleHydrogen production with photocatalysts prepared by mechanochemical methods
dc.typeMaster thesis
dc.subject.lemacHidrogen com a combustible
dc.subject.lemacFotocatàlisi
dc.identifier.slugETSEIB-240.152429
dc.rights.accessOpen Access
dc.date.updated2020-10-06T04:39:12Z
dc.audience.educationlevelMàster
dc.audience.mediatorEscola Tècnica Superior d'Enginyeria Industrial de Barcelona
dc.audience.degreeMÀSTER UNIVERSITARI EN ENGINYERIA DE L'ENERGIA (Pla 2013)


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-ShareAlike 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-ShareAlike 3.0 Spain