Evaluation of low-cost angular measuring sensors
Visualitza/Obre
29291795.pdf (326,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/328769
Tipus de documentText en actes de congrés
Data publicació2020
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
ProjecteMODELOS ESTRUCTURALES PARA LA GESTION EFICIENTE DE INFRAESTRUCTURAS: SMART BIM MODELS (AEI-BIA2017-86811-C2-1-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS (AEI-BIA2017-86811-C2-2-R)
Abstract
One of the main issues for performing Structural Health Monitoring (SHM) is the high cost of metering devices. In order to make it applicable to the conventional structures with low defined budgets, low-cost sensors have been widely utilized. In this paper, the characteristics of a low-cost circuit (MPU9250) with low power consumption for measuring angles are studied. This circuit is composed of an accelerometer, a gyroscope, and a magnetometer. There are two ways of coding and using this sensor for angular measurements. In the first application, the accelerometer and the gyroscope of the circuit are only used to get angle around X and Y-axis. In the second application, the gyroscope is going to be added to the other two sensors in order to get angular measurements of all axis. The data accuracy plus the advantages and disadvantages of the response of this circuit regarding each code has been studied in this paper by using the codded sensor in some experiments. Although the second application showed less error from the expected results, it was less stable than the first application.
CitacióKomarizadehasl, S. [et al.]. Evaluation of low-cost angular measuring sensors. A: International Conference of Recent Trends in Geotechnical and Geo-Environmental Engineering and Education. "RTCEE/RTGEE 2020: Proceedings of the International Conference on Recent Trends in Construction Engineering and Education and in Geotechnical and Geo-Environmental Engineering and Education, 10-11 September 2020, Brisbane, Australia". 2020, p. 17-21. ISBN 978-0-6489449-0-4.
ISBN978-0-6489449-0-4
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
29291795.pdf | 326,8Kb | Accés restringit |