Mass, heat and momentum transfer in natural draft wet cooling tower with flue gas discharge
Cita com:
hdl:2117/328232
Document typeConference report
Defense date2011
PublisherCIMNE
Rights accessOpen Access
All rights reserved. This work is protected by the corresponding intellectual and industrial
property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public
communication or transformation of this work are prohibited without permission of the copyright holder
Abstract
The paper presents CFD simulation results of a natural draught wet-coolingtower (NDWCT) with flue gas discharge. The problem considered is mixing of the fluegases with the rising plume and possible corrosion of the tower shell due to acid condensate.A previously developed CFD model of a NDWCT has been used in the analysis. Nowind conditions have been assumed and the results have shown that under this conditionthe corrosion is unlikely to occur
CitationKlimanek, A.F.; Bialecki, R.A. Mass, heat and momentum transfer in natural draft wet cooling tower with flue gas discharge. A: COUPLED IV. "COUPLED IV : proceedings of the IV International Conference on Computational Methods for Coupled Problems in Science and Engineering". CIMNE, 2011, p. 1371-1378. ISBN 978-84-89925-78-6.
ISBN978-84-89925-78-6
Files | Description | Size | Format | View |
---|---|---|---|---|
Coupled-2011-124_Mass heat and momentum.pdf | 414,8Kb | View/Open |