Show simple item record

dc.contributor.authorMiret Tomàs, Jaume
dc.contributor.authorCamacho Santiago, Antonio
dc.contributor.authorCastilla Fernández, Miguel
dc.contributor.authorGarcía de Vicuña Muñoz de la Nava, José Luis
dc.contributor.authorHoz Casas, Jordi de la
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2015-06-26T10:41:39Z
dc.date.available2015-06-26T10:41:39Z
dc.date.created2015-06-01
dc.date.issued2015-06-01
dc.identifier.citationMiret, J. [et al.]. Reactive current injection protocol for low-power rating distributed generation sources under voltage sags. "IET power electronics", 01 Juny 2015, vol. 8, núm. 6, p. 879-886.
dc.identifier.issn1755-4535
dc.identifier.urihttp://hdl.handle.net/2117/28430
dc.description.abstractVoltage sags are one of the main problems in transmission and distribution networks. This study proposes a voltage support control scheme for grid-connected low-power rating inverters under voltage sags. Voltage support capability is provided thanks to reactive current injection. The main objective is to inject the maximum rated reactive current during the voltage sag. Second, to raise the higher phase voltage to a predefined maximum boundary, thus preventing over-voltage. Moreover, with this strategy the phase voltages can be equalised. The first objective can be always accomplished during voltage sags. Achieving the second objective depends on the grid characteristics, the sag profile and the power rating of the inverter. Selected experimental results are reported to validate the effectiveness of the proposed control.
dc.format.extent8 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Energies::Energia elèctrica::Automatització i control de l'energia elèctrica
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Convertidors de corrent elèctric
dc.subject.lcshVoltage regulators
dc.subject.lcshReactive power (Electrical engineering)
dc.subject.otherControl Scheme
dc.subject.otherInverters
dc.subject.otherConverters
dc.subject.otherDips
dc.titleReactive current injection protocol for low-power rating distributed generation sources under voltage sags
dc.typeArticle
dc.subject.lemacEnergia elèctrica -- Distribució
dc.subject.lemacSistemes de distribució d'energia elèctrica -- Control
dc.contributor.groupUniversitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control
dc.identifier.doi10.1049/iet-pel.2014.0593
dc.relation.publisherversionhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7115307
dc.rights.accessOpen Access
drac.iddocument16615174
dc.description.versionPreprint
upcommons.citation.authorMiret, J.; Camacho, A.; Castilla, M.; Garcia de Vicuña, J.; De La Hoz, J.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameIET power electronics
upcommons.citation.volume8
upcommons.citation.number6
upcommons.citation.startingPage879
upcommons.citation.endingPage886


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder