Mostra el registre d'ítem simple
Integration of product conceptual design synthesis into a Computer-Aided Design system
dc.contributor.author | Álvarez Cabrales, Alexis |
dc.contributor.author | Zayas Figueras, Enrique Ernesto |
dc.contributor.author | Pérez Rodríguez, Roberto |
dc.contributor.author | Simeón, Rolando |
dc.contributor.author | Riba Romeva, Carles |
dc.contributor.author | Cardona Foix, Salvador |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica |
dc.date.accessioned | 2015-03-23T13:33:09Z |
dc.date.created | 2014-09-14 |
dc.date.issued | 2014-09-14 |
dc.identifier.citation | Álvarez Cabrales, A. [et al.]. Integration of product conceptual design synthesis into a Computer-Aided Design system. "Lecture notes in computer science", 14 Setembre 2014, núm. 8683, p. 214-221. |
dc.identifier.issn | 0302-9743 |
dc.identifier.uri | http://hdl.handle.net/2117/26943 |
dc.description.abstract | Commercial Computer-Aided Design systems have mainly focused to support the process of capturing and representing geometric shapes and incorporating technological information. In contrast, few utilities in these systems are present to facilitate decision making in the early stages of the design process, such as the capture, modeling and conceptual design synthesis of solutions. Typical tasks of the conceptual design process in mechanical design are lead in applications stand-alone or are based on the heuristic knowledge of the designer. Such approaches are non-interoperable with de commercial computer-aided design systems, leading to discontinuous design information of design process. This study addresses this subject and proposes a method to improve the integration of product conceptual design synthesis into a Computer Aided Design system. To validate the feasibility of the approach implemented, a prototype application based on a Computer Aided Design system was developed and a study case was accomplished |
dc.format.extent | 8 p. |
dc.language.iso | eng |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica::Fabricació::Disseny i càlcul de màquines |
dc.subject.lcsh | Computer-aided design |
dc.subject.other | Conceptual desing |
dc.subject.other | desing synthesis |
dc.subject.other | CAD |
dc.subject.other | collaborative |
dc.title | Integration of product conceptual design synthesis into a Computer-Aided Design system |
dc.type | Article |
dc.subject.lemac | CAD/CAM, Sistemes de |
dc.contributor.group | Universitat Politècnica de Catalunya. GREVTAM - Grup de Recerca en Vibracions i Teoria i Anàlisis de Màquines |
dc.contributor.group | Universitat Politècnica de Catalunya. GRESIM - Grup de Recerca en Sistemes Mecatrònics |
dc.identifier.doi | 10.1007/978-3-319-10831-5 |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 15533280 |
dc.description.version | Postprint (published version) |
dc.date.lift | 10000-01-01 |
local.citation.author | Álvarez Cabrales, A.; Zayas F, E.E.; Pérez Rodríguez, R.; Simeón, Rolando; Riba Romeva, C.; Cardona, S. |
local.citation.publicationName | Lecture notes in computer science |
local.citation.number | 8683 |
local.citation.startingPage | 214 |
local.citation.endingPage | 221 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [5]
-
Articles de revista [596]
-
Articles de revista [21]