| dc.contributor.author | Dumitru, Florina Diana |
| dc.contributor.author | Ghiban, Brândusa |
| dc.contributor.author | Cabrera Marrero, José M. |
| dc.contributor.author | Higuera Cobos, Oscar Fabián |
| dc.contributor.author | Gurau, Gheorghe |
| dc.contributor.author | Ghiban, Nicolae |
| dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
| dc.date.accessioned | 2015-01-12T11:54:56Z |
| dc.date.created | 2014 |
| dc.date.issued | 2014 |
| dc.identifier.citation | Dumitru, F.D [et al.]. Calorimetric analysis of a Mg-Zn-Zr alloy processed by equal channel angular pressing via route A. "Key engineering materials", 2014, vol. 583, p. 32-35. |
| dc.identifier.issn | 1013-9826 |
| dc.identifier.uri | http://hdl.handle.net/2117/25221 |
| dc.description.abstract | Being the lightest structural element, magnesium a
nd its alloys has attracted significant
interest in the last years, but because of its hexa
gonal close packed structure, magnesium presents
relatively low strength and ductility. One of the m
ethods to improve the mechanical properties of
the processed materials is through Severe Plastic D
eformation (SPD). ZK60 magnesium alloy
samples were subjected to 4 passes of equal-channel
angular pressing (ECAP) at a processing
temperature of 250°C, following route A. The micros
tructure was determined with an Olympus
BX51 optical microscope. Differential Scanning Calo
rimetry (DSC) was used to estimate the stored
energy and the recrystallization temperature after
each ECAP pass |
| dc.format.extent | 4 p. |
| dc.language.iso | eng |
| dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
| dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials |
| dc.subject.lcsh | Magnesium alloys |
| dc.title | Calorimetric analysis of a Mg-Zn-Zr alloy processed by equal channel angular pressing via route A |
| dc.type | Article |
| dc.subject.lemac | Magnesi -- Aliatges |
| dc.contributor.group | Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics |
| dc.identifier.doi | 10.4028/www.scientific.net/KEM.583.32 |
| dc.description.peerreviewed | Peer Reviewed |
| dc.relation.publisherversion | http://www.scientific.net/KEM.583.32 |
| dc.rights.access | Restricted access - publisher's policy |
| local.identifier.drac | 15359642 |
| dc.description.version | Postprint (published version) |
| dc.date.lift | 10000-01-01 |
| local.citation.author | Dumitru, F.D; Ghiban, B.; Cabrera, J.; Higuera, O.; Gurau, G.; Ghiban, N. |
| local.citation.publicationName | Key engineering materials |
| local.citation.volume | 583 |
| local.citation.startingPage | 32 |
| local.citation.endingPage | 35 |
