Show simple item record

dc.contributor.authorPous Solà, Marc
dc.contributor.authorSilva Martínez, Fernando
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2014-04-02T12:37:20Z
dc.date.created2013
dc.date.issued2013
dc.identifier.citationPous, M.; Silva, F. Co-simulation methodology to evaluate digital communication systems interfered by transients. A: International Symposium on Electromagnetic Compatibility. "Proceedings of the 2013 International Symposium on Electromagnetic Compatibility (EMC Europe 2013): Brugge, Belgium: September 2-6, 2013". Brugge: Institute of Electrical and Electronics Engineers (IEEE), 2013, p. 665-670.
dc.identifier.isbn978-1-4673-4980-2
dc.identifier.urihttp://hdl.handle.net/2117/22491
dc.description.abstractIn this paper a method combining different types of simulation is used to evaluate transient interferences over a digital communication system at its frequency band. The method combines different simulation stages; the first one is an electromagnetic simulation, with FDTD numerical method, which is carried out to establish the level of the interference coupled to the digital communication system; at the second stage, the simulation of the transmitted data at the communication system is performed introducing the EM interference calculated at the first stage. The result of this co-simulation will be a BER and other useful indicators to quantify the degradation produced by the transient interference. To show the effectiveness of the co-simulation method first of all the method is validated comparing the results with other evaluation techniques, measuring a real interference over an RFID system. The RFID system is according to the ISO 14443 type B standard, and the interference generated is a burst according to 61000-4-4. Once the co-simulation method is validated, the co-simulation system is used to quantify and decide if an EMC redesign technique of the previous scenario is efficient enough to avoid degradation at the RFID system produced by the burst transient interference.
dc.format.extent6 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria de la telecomunicació
dc.subject.lcshDigital communications
dc.subject.otherDigital comunication syste
dc.subject.otherEM simulation
dc.subject.otherFDTD
dc.subject.otherRFID
dc.subject.otherTransient interferences
dc.titleCo-simulation methodology to evaluate digital communication systems interfered by transients
dc.typeConference report
dc.subject.lemacComunicacions digitals -- Mètodes de simulació
dc.contributor.groupUniversitat Politècnica de Catalunya. IEB - Instrumentació Electrònica i Biomèdica
dc.relation.publisherversionhttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6653385&tag=1
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac12920065
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorPous, M.; Silva, F.
local.citation.contributorInternational Symposium on Electromagnetic Compatibility
local.citation.pubplaceBrugge
local.citation.publicationNameProceedings of the 2013 International Symposium on Electromagnetic Compatibility (EMC Europe 2013): Brugge, Belgium: September 2-6, 2013
local.citation.startingPage665
local.citation.endingPage670


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder