Mostra el registre d'ítem simple

dc.contributor.authorBairán García, Jesús Miguel
dc.contributor.authorCladera Bohigas, Antoni
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria de la Construcció
dc.date.accessioned2014-03-21T15:59:08Z
dc.date.created2014-04
dc.date.issued2014-04
dc.identifier.citationBairan, J.; Cladera, A. Collapse of a precast concrete beam for a light roof: importance of elastomeric bearing pads in the element’s stability. "Engineering failure analysis", Abril 2014, vol. 39, p. 188-199.
dc.identifier.issn1350-6307
dc.identifier.urihttp://hdl.handle.net/2117/22335
dc.description.abstractThe importance of second order effects has been widely studied in slender concrete structures subjected to compressive stresses, although their effects are not generally taken into account in other fields of structural engineering; this is the case of the overall stability of structures flexible supports, as elastomeric bearing pads. In this paper, the collapse in construction of a 24.9 m span precast concrete Y-beam for the light roof of a sports hall is studied. The roof consisted of a series of these beams simply supported at each end by plain neoprene bearing pads. After a worker had climbed up to the last placed element, the element over-turned producing a partial collapse of the light roof. A simplified analysis, without considering second order effects, indicated that there was an over-turning safety factor (OSF) of 2.67. However, a more detailed analysis showed that with the bearing pad arrangement used, rotational stiffness was drastically reduced, causing the second order effects to gain importance. In spite of the OSF the safety of the element is shown not to be adequate. Upon considering the actual flexibility of the bearing and the large rotations, a reduction of the OSF to neutral equilibrium is explained. Sensitivity and probabilistic analyses are conducted in order to investigate the influence of each parameter and the most likely failure cause. A 90° plan rotation of the bearings would increase stiffness, remarkably reducing the second order effects and would achieve an OSF of 3.99 and a reliability index of 7.9.
dc.format.extent12 p.
dc.language.isoeng
dc.publisherElsevier
dc.subjectÀrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó
dc.subject.lcshPrecast concrete beams
dc.subject.otherCollapse
dc.subject.otherPrecast beam
dc.subject.otherLight roof
dc.subject.otherElastomeric bearing pads
dc.subject.otherSecond order effects
dc.subject.otherLateral instability
dc.titleCollapse of a precast concrete beam for a light roof: importance of elastomeric bearing pads in the element’s stability
dc.typeArticle
dc.subject.lemacBigues de Formigó pretesat
dc.contributor.groupUniversitat Politècnica de Catalunya. TE - Tecnologia d'Estructures
dc.identifier.doi10.1016/j.engfailanal.2014.02.001
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S1350630714000351
dc.rights.accessRestricted access - publisher's policy
drac.iddocument13064789
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
upcommons.citation.authorBairan, J.; Cladera, A.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameEngineering failure analysis
upcommons.citation.volume39
upcommons.citation.startingPage188
upcommons.citation.endingPage199


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets